Thinking Outside the Bubble Live-Streaming from a $350 360 camera into Virtual Reality The Ricoh Theta S has achieved much praise within the VR community as being an easily affordable 360 camera that does all the things. The camera has 14MP resolution...
https://www.esp32.com/viewtopic.php?f=19&t=1746&p=8153&hilit=parallel#p8153Seems like I'm 3us late with reading and preparing my response. The posted scan looks like it takes 175us from address change to address change. Putting it in relation, an EEPROM...
The orginal goal of this project was to make a smarter & powerfull(er) serial com to my Canon X-07 (by adding support to UARTs & uSDCards).It 's now happening ...And I hope some other ideas will come soon....
The current prototype of the MicroGrid Connection Unit uses a regular 5V Arduino Nano, and an ACS712 current sensor to measure the current flow to or from the grid. Unfortunately, the Nano33 IoT is running at 3.3V instead of 5V, but the ACS712 doesn't...
There was an unofficial statement of "bonus points for blog posts" on the element14 community page for the "Hack Like Heck" contest, so that's why I'm posting my logs there and I'm too lazy to copy them over here. Wouldn't feel right either, so I admit...
That was the tittle of the great post made by Elliot Williams."The Otto DIY robot has just taken first place in the coveted role as “best robot to 3D print for your (inner) child”. It’s cute, it dances, it doesn’t cost too much, it’s completely...
Proposta helicóptero tem fuselagem com cabine de tripulação equipadas com unidades de controle, caixa de velocidades com dois veios coaxiais de rotação oposto; principais pólos do rotor são montados em cada eixo; helicóptero...
The good news is that I can play back and record robot movement and robot tool behavior. I do not yet have a way to recording adding and removing robots, or moving whole robots (base frame of reference). I have a more serious challenge dealing with GUI...
(Original post date: 1/03/16)The front panel of my vintage toy synthesiser is the place where all the dials and buttons for controlling the sound parameters will be attached to the toy piano. While the final design of the panel has turned out very similar...
The Solar Panel, Solar Charge Controller, Deep Cycle Batter, Luminosity Sensor, and GPS shield are all in. Right now I need to calculate the degrees of freedom to figure out where to place my light sensors. This allows for the light sensors to capture...
I've made a board that makes this project particularly easy - it's the SkyTraq Venus838LPx-T breakout board product I sell on Tindie, but there's a new variant designed to be placed over the first 12 pins of the Raspberry Pi GPIO header. It connects...
The MalyanM200/Monoprice Mini has an interesting feature in that it supports wifi printing - the ability to connect Cura or something similar via wifi and print directly that way. This is accomplished via combination of features, starting with...
In this chapter I will show you the procedure to use OpenMV when we are going to test the machine learning model created with Edge Impulse on our Nicla Vision board. Build the Firmware Since the Nicla Vision doesn't have any on-board SRAM we need to...
Nesta última década assistiu-se a uma proliferação enorme de aparelhos eletroeletrônicos portáteis, tais como: brinquedos, jogos, relógios, lanternas, ferramentas elétricas, agendas eletrônicas, “walk-talks”,...
I just released STM8EF v2.2.6 with some really nice features from the development branch:significantly more compact compiled user codeinterrupt code in Forth (thank Elliot for nagging me)simulated COM ports are no longer limited to Port D (but work with...