68080 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Rev 1. PCB Assembly!
Log from CRAPi2040
Alright here we go! In case you missed the last log, here it is! Check it out because what you're about to see will make a lot more sense. Just like the last log, this log is going to be a retrospective, but I promise that the next CRAPi2040 log to grace...

Glue Everything Together!
Log from STM, Budget Style~~
Supposedly, I should be able to screw everything together, but since the CNC shop can't make that M3 threaded hole, i'll just glue everything together. No biggie. However:DO NOT STARE AT THE HEAT LAMP!!! this is from my own bloody experience. Just do...

The EEPROM is working (finaly)
Log from ESP8266 Plant Watering
This step took way longer then I exoetced. First of I still dont know if the chip was broken or the wirring was wrong but after recabling everything and replacing the chip everything worked as intendet. Getting the communication right was a bit tricky...

2014.07.24: Initial github commit
Log from Digitabulum: The last motion-capture glove
.__ , . .| \* _ *-+- _.|_ . .|. .._ _ |__/|(_]| | (_][_)(_||(_|[ | ) ._| Everything is broken. Has value as notes, and as an indication of the direction development will take. Repairs forthcoming....

TCD1304 is working
Log from IRIS : another open source spectrometer
Today I test the TCD1304. Everything works well ( I was able to capture a spectrum ). Anyway I need to change some timing in the VHDL code to have a better management of the CCD.

Getting close
Log from Christmas Orchestra
After several hours of soldering to extend cables, everything is wired up and waiting in the studio... won't be too long now!

Hardware Update
Log from Mrs. Penny's Driving School
Everything seems to be in order for our 2nd class. I couldn't wait, had to assemble one of the boards.

Almost done with design
Log from Pi Tab (7")
Uploaded under Files: 3D model of all electronics inside (except WiFi and camera, still working on that). Everything will fit!!!!! And there will still be some space left.

Interior done!!!
Log from Pi Tab (7")
I put everything in its place, the 3D design is at its end ( now I'm making the inner part of the case for boards and wires).

Licenses
Log from Perpetual Motion Machine
Everything will be free, open source, and permissive, of course!The entire project has and will be designed wholly by me, and released under the MIT license.

Upon searching the web I found a similar idea
Log from Virus Protection - Dummy File Method DFVP
A dummy file filling the remainder of a directory was created preventing everything from being installed this idea is not mine but may be of use.

Result of 50 hours oft printing
Log from A drinking game, but the nerdy way...
Everything went pretty well and also the first components fit perfectly !!! Ready for more ⚛🤓

Update
Log from Anycubic Wash And Cure 2.0 Silent Mod
So, apparently "AT2100" is the only "silent" driver that works without completely modifying the firmware of the board. Everything else will make the motor stutter and seize up.

Downloaded
Log from avrbeginners.net vault
I downloaded all avrbeginners.net source files. Next I'll go through them, strip them of everything that might be unnecessary, and then upload the source here.

Files updated
Log from An open-source fermenter
We have uploaded the latest versions of the fabrication files. There is now everything needed to make the cabinet and the electronics. Let us know what you think about it!

|<
<
2
3
4
5
6
>
>|