77231 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸ㆌ ∩anyway≒강남셔츠룸강남셔츠룸∧warmly 강남셔츠룸셔츠룸사이즈 셔츠룸터치の셔츠룸테란мhearingキ"

Removing undesired reflections/spots
Log from Open Indirect Ophthalmoscope
Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

The New Model
Log from Open Indirect Ophthalmoscope
The design models have been 3D printed and assembled. We made two devices, only the outer casings are different in the two models. One is printed on a SLS 3d printer (Nylon PA-12) and another one with an FDM 3D printer (PLA Black).Both the models are...

OS Upgrade and introduction of WiFi enabled device
Log from Open Indirect Ophthalmoscope
This log includes major upgrades included in the current system.Till now we had been using an older OS incompatible with RPi 3 since the display could have only worked with that image. Additionally it caused the trouble where the onboard or external...

TCD1304 is working
Log from IRIS : another open source spectrometer
Today I test the TCD1304. Everything works well ( I was able to capture a spectrum ). Anyway I need to change some timing in the VHDL code to have a better management of the CCD.

final design (almost)
Log from USB cable tester
ordered... and just saw the mistake on the silkscreen... gnargh. Anyway, don't want to neglect this project - so I ordered them.

Updated 3D files
Log from STM32L0 Watch
I accidentally uploaded an earlier version of the back face. It's supposed to have this thin cutout for the PCB. Anyway, it's fixed now!

Getting Wonderswan
Log from Apple Bandai PIPPIN 256GB from Evangelion
I managed to get Wonderswan Color in my city. But without cartridge! Anyway, this unit will be 3d scanned soon.

New file - FreeCAD Project
Log from Hosaka MK I "Sprawl Edition"
Uploaded the FreeCAD file. Pay attention! FreeCAD files are hard to edit anyway and my project has become quite a mess over time...

Kit prices are going up
Log from LitePlacer - a low cost Pick and Place machine
As noted, very few updates here, now when the project has its own web site at www.liteplacer.com. Anyway, the kit prices are going to go up. Full details at the newsletter: http://eepurl.com/b7QgR9

First release of microcontroler version
Log from IRIS : another open source spectrometer
I've just released the PCB for the microcontroller version of the spectrometer. I stiil have to :- Improve firmware- Improve PC softwareAnyway i'm already be able to acquire some spectra.

Typing Typing Typing
Log from Synthetic Aperture Multispectral Imager
Design is fun until you have to describe what you've built...apparently nobody is a mind reader so I actually have to convey these things in physical form! Anyway, here's some eye candy! Get it? HA!

USB-A male to USB-A male
Log from USB cable tester
I'm probably able to use different connectors anyway, but I now went for the cable type I most probably want to check - A male to A male. I had to switch the battery holder and noticed that I could also check for mirrored/crossed wirings by adding some...

Planning done
Log from ZynqBerry
With lowest cost ZYNQ device package some compromises are required:1 Bidirectional DSI not possible - this is very maybe not needed anyway2 Analog video output replaced by audio input in 3.5mm JackThis setup yields in I/O Pin utilization of 100% nothing...

pcb designed
Log from modbox - a modular controller / display
I want to test the tiny88 so I needed a breakout board anyway. I decided to try and get close to the right size and added encoders and LEDs as well.

How to demo?
Log from FPV for Mavic Pro
So here's a question - how do I demo this? I think a video of me wearing goggles and flying a drone might be quite dull. Just wondering aloud ... while the rain outside prevents me testing it anyway ...

1
2
3
4
5
>
>|