28422 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 강남쓰리아워ｈ 쓰리아워worship쓰리아워레깅스룸쓰리아워가격강남쓰리아워egypt 강남술집정보クＱ강남쓰리아워disorder"

April 12, 89 PD
Log from Mk 16 Capital Ship MDM
CAD work and fabricator begins today. It is our hope to start piecing together the first parts this afternoon. It is going to be a long push up hill from here, but we do not have a scope change, yet. As soon as we have the first parts done we will start...

Tablet Init
Log from WiiChuck
We have some bytes from the tablet. It's all pretty standard stuff with one exception.// unenc init a4 w f0 55 a4 w fb 00 Read ID Bytes a4 w fa a5 r ff 00 a4 20 00 13 // Enter enc mode a4 w f0 aa // write 16 byte key a4 w 40 e0 7d e0 7d e0 7d a4 w 46...

New V1.2 boards arrived incl. footprint fail
Log from µPower (beehive) SD logger
Update 12.06.18 - pics of the new board Not much cleaning done so far. They'll get their proper isopropanol cleaning when fully populated! top side with 18650 cell (LG-2) bottom side ---------- more ---------- Just soldered one of the new boards and...

SD Cards - PSoC to Z80
Log from 3-Chip Z80 Design
Now that we can read SD cards and have an I/O interface in place from the Z80 to do I/O mapped access to the SD card it's time to hook the two pieces together. To do this we will need to look closer at how Grant's code request blocks. The loader...

Tinymovr
Log from Ø32 BLDC Controller
Found out about the Tinymovr motor controller. Basically what I'm trying to do! Very cool, and my version 2 will use it as reference. I hope to make mine even smaller (27x27mm vs 40x36mm) and cheaper ($40 vs €89). I only need up to 13V (3S lipo),...

Frequencies
Log from Voyage 200 Upgrades
For some reason the 47 pF value for the caps is sitting in my mind. Either after 'calibration' the LC meter is so far off that it read both my TI-89's and my V200's caps 51 pf, both ~8% high, or both of them are within their 10% tolerance and reading...

Gathering information
Log from WD2002SJ Bench Power Supply
Tonight I gathered some reference/research material for this project. Fortunately, several others have done some really great work with this module, so here's credit to them: LTC3780 DatasheetBeyond Logic blog postTemplaro blog postGreat Scott videoJulien...

Parity with Fibonacci
Log from PEAC Pisano with End-Around Carry algorithm
One thing that sets PEAC apart from the Fibonacci and Pisano series is the parity, or mod 2 remainder. When you take the natural sequence 0, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89, 144, 233, 377, 610, 987, 1597... The mod 2 is 0, 1, 1, 0, 1, 1, 0, 1, 1,...

MiCS-VZ-89T a low power air quality sensor
Log from Portable environmental monitor
Putting everything together also requires checking everything separately first. So I did with the MiCS-VZ-89T sensor, and here is the story, also presented on my blog: MiCS-VZ-89 Air Quality SensorA low power sensor that can measure at the same time...

Z80 (CP/M) Writing to SD Card
Log from 3-Chip Z80 Design
Digging into SD card writes means shifting gears from the Boot BIOS source code since the Boot BIOS code only does reads. The CP/M BIOS code (CBIOS128.LST) which does the reads/writes after booting. Here's the BIOS code for writes to the SD Card: 0754...

Breaking AES using a $90 Development Board + OpenADC
Log from ChipWhisperer®: Security Research
Long ago when I started prototyping ideas, I was using a $89 FPGA Board (Avnet LX9 board). The ChipWhisperer system has always supported this board, but it's not as well documented as my newer, fancier hardware. I wanted to make a log post to demonstrate...

We get signal
Log from Reverse-Engineering a low-cost USB CO₂ monitor
Indeed, immediately after running the Windows software in a VM with the device connected I was getting a live data log of the CO₂ concentration! This screenshot shows me breathing into the vicinity of the sensor:Ok, time to disconnect the device from...

Researching Options - Power
Log from Boxies - Low power RF LED Cubes
I'd like to avoid frequently replacing batteries or running power wires to the boxes if at all possible, as such, I'm either wanting to have ultra-low power components and 'smarter' operational times (eg only show LED's when someones in the room) or...

No officer, it's not a bong. I swear.
Log from Mk 16 Capital Ship MDM
Morning update: April 13, 89 PDAfter a long night of fighting with 123D make and my 3d printer, we have our first put together. To see very bad pictures of the Main Power/Data Bus (MPDB) look at step 2 of the instructions. After getting put together,...

It's like being in college again.
Log from Mk 16 Capital Ship MDM
Mid-day update: April 20, 89 PDWhile over 75% of the internal parts are finished printing, but there is still too much to do. We have started wiring up the reactor with LEDs but it is slow going (25% done). We have not even started on the code to drive...

1
2
3
4
5
>
>|