Close

18880 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

  • Plans & Hackaday Prize
  • Log     from ICeeData
  • It's been a week since the hackathon ended. What are our plans for now?1. Build a GNU/Radio routine that'd capture the signal, apply all the filters that could be necessary and decode the data. There's a lot to be learned with GNU/Radio and RF in general....

  • More evaluations
  • Log     from Nixie Tube 170 V flyback DC-DC power converter
  • The previous update looked at voltage ripple and transients. Another important area to investigate is the switching waveforms. This shows the switch node and gate voltages. ---------- more ---------- And a close up: The first thing to notice is that...

  • Works on the breadboard
  • Log     from RFID Ninja Tool
  • Everything works on the breadboard. I've tested everything a few times. I've even made sure everything fits inside the PVC. The only thing I'm missing at the moment is the voltage regulator that will allow me to power the ID-2 (among other things). Since...

  • Reliable Performance
  • Log     from Car Battery Monitor
  • A short update to say this project has now been continuously live behind the front bumper of my car for 8 months now and has survived everything the weather and the cars electrical system has thrown at it.

  • The hackathon story - second day
  • Log     from ICeeData
  • I woke up on the floor of our cubicle, besides the desk, head resting on my backpack and body covered by my jacket. I have to say, it was relatively comfy, even though I have to say it took some time to understand why I woke up in such a weird position....

  • Automatics!
  • Log     from N.I.T.E (Nissan Industries Two Eighty)
  • Automatic windows are installed -- everything still needs to be cleaned up and the doors need to have the interior piece fabricated -- but the electronics work, and that's the important part!So to date:1. Automatic Locks = Installed2. Automatic Windows...

  • On board sound synthesis
  • Log     from Kwese - musical instrument
  • I got in touch with a very helpfull representative of VLSI solutions, who was good enough to send me some VS1053B chips. I also ordered the sparkfun musical instrument shield that has this same chip nicely broken out. This means that it can be a standalone...

  • 1+1 Does Equal 2 !!!!
  • Log     from Mega-One-8-One
  • Found some time this evening to hook up the Mega-One-8-One for testing. The Mega-One-8-One is a gate level accurate replicate of the classic 74181 Arithmetic-Logic Unit(ALU) for educational purposes. With the exception of one LED not being soldered...

  • everything ready for a small run
  • Log     from sloth badge
  • After a little email exchange with Paul from pimoroni we agreed on me doing a small run of badges on @Tindie  is alright with everyone, including their designer, so I will finally do a batch run with @oshpark for the first time.The code has...

  • Mechanical arrangement
  • Log     from GPS (or not) chime clock
  • I thought long and hard about how to mount everything. The big issue is that the solenoid throw is parallel to its longest dimension. Unless I wanted to try and make some sort of hinged hammer this meant mounting the solenoids at a right angle to the...

  • Harness the Power

  • Log     from Taz 5 BTT SKR 3 Refit
  • I had several challenges now. One of which is that the wires from the Lulzbot Taz 5 box were too short to wire to the new SKR board. Another is that the RAMBo board used a different connector than the SKR. Lastly is that I didn't want to re-pin...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday