31929 Results for "《 예약문의 OIO↗8489↗8306》청담가라오케П㈄delightfulセ가라오케가라오케νreflected 가라오케사이즈가라오케 가라오케추천㎙가라오케ｑbring㈀"

Day 2 (part 1) - Fabric, Access, Workshop and LEDs!
Log from Cultural Integrity (at the Dethrone Hackathon)
The big hacker day was upon us and the gears were in motion! Julia jumped into action during morning solo hacker time. She went to the Mission Fabric Outlet store to find our throne-worthy textiles, as well as coordinating with a participant...

Day 2 (part 2) Rap Music & "Shopping"
Log from Cultural Integrity (at the Dethrone Hackathon)
Julia and I rushed over to TAP plastics, hoping to get our acrylic sheet before closing. On the car ride over, I opened my CD case and asked Julia, "is there any music thatyou'd like to hear?" "You just have old people music, right?'" she said. She wasn't...

Day 2 (part 3): Spray Cans, Ultrasonics, and Mischief
Log from Cultural Integrity (at the Dethrone Hackathon)
Once we got back to my apartment, the fatigue began to set in. It had been a long day already, with nonstop running around. I asked Julia if she could wait for a few minutes while I rested. She was totally understanding and didn't give me...

Serial port
Log from TTi 1705 True RMS multimeter teardown
The serial port pin-out is cunning designed so that you can connect to a PC with a simple modem cable, or daisy-chained with other TTi devices. 1 Power to optional PC-02 2 TXD Transmitted data from instrument to PC 3 RXD Received data to instrument from...

What have I got?
Log from Interak Computer Restoration
The first step, after wiping-off the accumulated grime and surface corrosion, was to assess what I have. Within the very large - and very heavy! - case were four cards - an MZB-3 CPU card, a VDU-2K (composite video only) 'graphics' card, an FDC-1 Floppy...

I must fly...
Log from ML Clip Cam
In 5 daysThis is a distraction from writing the Pelicam software but days off and nice weather, have to flyI'm going to at the very least build a crude 1 day thing that functionsIt is pretty much just a battery-powered rpi cam... but it will be attached...

Week 3 - PCBs in, soldering and assembly
Log from 25in24 Electronics Project Board
PCBs came in! Thanks JLCPCB!!Soldered up the boards - Kino in the Design Lab Laser cut a cool outline in plywood that I'm using for the base for testing.Boards were soldered and mounted. There were some clearance issues with the meter...

Week 3 part 2 - testing
Log from 25in24 Electronics Project Board
Well, initial testing was more difficult than expected - took about five hours just to get a couple of basic circuits working. Made a number of incorrect assumptions / mistakes including:Assuming it might be differences between components (germanium...

Rev1 Voltage Test
Log from Multimeter
I did another test with the rev1 prototype, this time only measuring voltage, and bringing it all the way to the maximum voltage of 60V. Again I am doing calibration and comparison to my Fluke 101 Multimeter. This has a problem as the Fluke 101 does...

Frankenscope
Log from Low-Cost Microscope Boom
There's not much to this build: Mount the monitor arms to your bench. Follow the manufacturer's instructions, or wing it like I did. I figured out where I wanted the scope to end up when in use and marked the location on my bench. Used a 1.5" hole...

Prerequisites and software
Log from VGA videocard for microcontrollers
Sometimes, when making your own devices on microcontrollers, there is a need to display huge amounts of information on a display and to use a bigger screen for ease of perception. Unfortunately, there are no ready-made and budget-friendly solutions for...

From prototype to product creation
Log from VGA videocard for microcontrollers
First of all, you should pay attention to the ROM used. The flash-ROM chip from an old computer motherboard has a finicky parallel interface where the address is written in two runs. This complicates the operating logic and increases access time. Additionally,...

Step 3: Thingspeak
Log from Weather Station With A7670 -- Remote Monitoring
ThingSpeak Is The Open IoT Platform With MATLAB Analytics. Register and log in to your accountDefine the parameter you want in the Channel page and save itOn the API keys page you can find out the API key used to write the data, and you can see an example...

Step 4: Firmware about LTE
Log from Weather Station With A7670 -- Remote Monitoring
Using HTTP(S) AT Commands, accessing to HTTP server,SerialUSB.println("Maduino Zero 4G LTE CAT1 Test Start!"); SerialUSB.println("Wait a few minutes for 4G star"); delay(3000); sendData("AT", 1000, DEBUG); delay(5000); sendData("AT+CICCID", 1000, DEBUG);...

It All Comes to A Head Soon
Log from Longer LK5 Pro Delirium Build
I'm currently missing two components: My linear rails and a custom-cut bracket to hold everything together. The linear rails arrive in 3 days, but I have no clue how I'm gonna handle the bracket I need CNC'd. If only PCBWay wasn't so expensive...Funny...

|<
<
2126
2127
2128
2129
>
>|