4626 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ《〈 문의 OIO↗5793↗7458 》〉㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

OS Upgrade and introduction of WiFi enabled device
Log from Open Indirect Ophthalmoscope
This log includes major upgrades included in the current system.Till now we had been using an older OS incompatible with RPi 3 since the display could have only worked with that image. Additionally it caused the trouble where the onboard or external...

Finally working!
Log from Wac0m Rip0ff : Wacom I2C hacked!
I finally make it working (at least on Windows 10). I already committed to my GitHub, so the latest code is now working! Also, I'm now understanding the way to report the correct hid event, so let me guide through. the number in parentheses corresponding...

Beforehand
Log from World Create Day / Super Happy Hacker House @ VHS
The World Create Day was a pretty great excuse to pair up with out semi-regular event, Super Happy Hacker House.It's an open house, where everyone can come in, bring a project, talk about things they've done, and then do some lightning talks. Sound familiar?https://www.instagram.com/p/BTJxQdnFdrS/?taken-by=vanhackspaceThe...

Getting pen friends to obtain more experimental data
Log from Light level geolocator
I have a few ideas in mind how to make the algorithm to determine the dawn/duck time (don't forget this algorithm has to be lightweight enough to fit on low-power MCU), but taking a measurement in single place, fit algorithm to it and call it done is...

Working - Plotter part
Log from 3D Moving Machinery
It is finally working. Built the whole thing, assembled, then redesigned most of the pen holder. The problem was the following: The SG90 microservo I intended to use was not strong enoughThe line I wanted to use to pull up the Z carriage was a bad design...

Deadbug Prototype
Log from Bright.
I recently got a message from a 'community manager' at hackaday.io requesting that I post more pictures of bright. I threw together a rough prototype on a breadboard with an arduino pro mini, but ultimately didn't want to post pictures of it. I wanted...

Video demonstration
Log from Soldering pen
I finally managed to make a short video demonstration of the soldering pen. It can be found here:I fumble a bit - so much for unscripted one-takes :)I've tried to compile a list of the things I still need to finish (not in order): - making a stand -...

PCB has arrived! & LM2575 SMPS test
Log from IN-12A Nixie Clock Project
PCB has arrived!The nixie clock's main board that I ordered last time has arrived. (Delivery was faster than I thought ;D )I ordered ceramic capacitors and several types of 3216 type resistors needed for PCB assembly.Since the 0.1uF ceramic capacitors...

More than 24 hours uptime. Very promising!
Log from TIRO Vibrating Watch
[Update 2: 72 hours!][Update: It's now more than 48 hours!] More than 24 hours ago I started the test to find out how long my project would run on a CR2032 coin cell battery (More info about the project here). Thankfully, it is still running with still...

InkScape/KiCAD drawing toolchain
Log from 3D Moving Machinery
The first test of the plotter, this one: was done with the following software toolchain: I draw that spiral with InkScape, saved as DXF and converted with the DXF2GCODE software from sf.net: https://sourceforge.net/projects/dxf2gcode/ Tried to use a...

Adding wall-wart power option to a phone
Log from Creative repairs and hacks
I still have a few of those old house phones from a bygone era in the house with caller ID. The caller ID display is usually powered by some AA/AAA batteries that seem like they always need to be replaced that of course no one gets around to replacing....

Board bring up & evaluation
Log from Ultra low power LED
Revision 1 In first instance, we'll try to compare the performance with the #TritiLED. In order to do that, we'll assemble the following variant: Placing R8 instead of the TPL5110 circuit so that the LED doesn't flash. This will make it easier...

More reworking, and trouble with thermocouples
Log from RT Soldering Station
So, since the last project log, (actually, since Monday) I've actually switched microcontrollers twice: first, from the Nano to the Pro Mini, and then to the Pro Micro. (the Pro Mini doesn't have enough code space to fit the library for the OLED...

Project Resources and General Planning
Log from Poor Man's Mini 3D Printer
This project was inspired by various people who has had success making their own version of home made 3D printers. I am fortunate that there is now a wealth of resources and tutorials that I could follow. Without them, I doubt I would have attempted...

esot.eric's attempt at johnowhitaker's Toner-Lasering Technique... GO!
Log from CD/DVD mechanisms and cartesian thinggie[s?]
Check Out @johnowhitaker's new project: #Mini PCB printer, which describes a technique to laser-melt toner directly onto copper-clad board!If you haven't seen it already, a while-back @johnowhitaker came up with a technique to laser-melt toner directly...

1
2
3
4
5
>
>|