Close

5814 Results for "%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EA%B0%95%EC%B6%94%E2%9C%9Awww%2Coptime4.com%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%20%EC%9D%B8%EC%B2%9C%EB%A7%88%EC%82%AC%EC%A7%80%20%E2%9C%9A%20%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%E1%98%9B%20%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EC%82%AC%EC%A7%84%E1%98%9B%20%EC%9D%B8%EC%B2%9C%ED%9C%B4%EA%B2%8C%ED%85%94%20%EC%9D%B8%EC%B2%9C%ED%82%A4%EC%8A%A4%EB%B0%A9%20%ED%83%80%EC%9E%84"

  • EC Sensor

  • EC is the abbreviation for Electro Conductivity. It is used to determine the nutrient concentration of the solution. This factor is essential to optimize the soilless culture. Indeed, the nutrient concentration will not be the same for a seeding as for...
  • EC Sensor

  • EC is the abbreviation for Electro Conductivity. It is used to determine the nutrient concentration of the solution. This factor is essential to optimize the soilless culture. Indeed, the nutrient concentration will not be the same for a seeding as for...
  • Building an EC sensor.

  • The end goal for the Autodro is a complete monitoring system for under $10. This means that cheaper, simpler, less accurate sensors are needed. I've started with a simple EC sensor, and am hoping to design something around $1.So far, I've created a sensor...
  • Improvement of the EC sensor

  • It is better to read the EC sensor log before reading this one. I wanted to test the stability and accuracy of the EC sensor! So I replaced the EC probe with a fixed resistor (to mimic the resistance of a solution).   The EC probe was replaced...
  • Improvement of the EC sensor

  • It is better to read the EC sensor log before reading this one. I wanted to test the stability and accuracy of the EC sensor! So I replaced the EC probe with a fixed resistor (to mimic the resistance of a solution).   The EC probe was replaced...
  • Access SD Cards from the PSoC

  • I'm going to create a stand-alone PSoC project to use the PSoC to read SD cards. I'm going to start with the hardware defines for this project (which should leave the Z80 hardware pins unmolested) and just not download code. For the software piece, I...
  • ALU and Instruction Set

  • Hardware testing is complete on all the jump and branch instructions. So that's the first 8 out of 256 instructions tested! The next 24 are loading operands. These should work fine since the jump/branch instructions are also loading operands in order...
  • Multi-boot Multicomp (Part 2)

  • I've got the BIOS loading for Multi-boot Multicomp. It boots up to the Multi-boot prompt. > Available Commands: :ccxxxxiibbbbbb Load Intel-Hex file record Rxxxx Run from address xxxx Sddd System boot Iddd Init: Format directory Pddd[,xxxx] PutSys: write...
  • The Keyboard

  • Before I start this log on the keyboard I should mention that I'm in the process of putting all of my writings and software on the Video Writer on a small website. The following is an almost direct copy of what will be the article about the keyboard......