Close

5393 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 강남쓰리아워㎰ 쓰리아워fearful쓰리아워레깅스룸쓰리아워강남술집정보constructed 쓰리아워가격ペゴ쓰리아워wealthy"

  • CPLD Topics
  • Log     from HD6309 Singleboard Computer
  • A couple of other questions that I've been asked revolve around programming the CPLD, which I'll try to summarize here.CPLD Programming Questions regarding the Altera EPM7128S seem to fall into two 'buckets': tooling, and issues with flashing. CPLD Tooling...

  • Ready for the final version!
  • Log     from C64 Flash Cart
  • I can't believe we're finally here, but the C64FC is ready for the FINAL VERSION. After locating a couple of minor hardware bugs and implementing V-USB, the device works as expected and runs flawlessly! Words can not describe how thrilled I am right...

  • Dead reconning and particle filter
  • Log     from Autonomous Pi bot
  • After outputting delta heading to csv and graphing it I determined the maximun valid rate of change to be 25 degrees per second.I capped the output of the gyro to this rate which resulted in very accurate dead reconning data considering the ground slip.This...

  • Enclosure and future plans
  • Log     from HAL 9000
  • So, I just got a dremel yesterday, and today's build log will be all about designing and building the enclosure.  I've been off for a while due to a large amount of schoolwork, but now I can get back to designing HAL.  As well as including...

  • Version 0.1 - the Birth
  • Log     from T-Board: uc Prototyping
  • My RF Project: The ProblemI was working on a low-energy RF project, using the HopeRF RFM12B. I was going to start out by prototyping using my Arduino UNO, but hit a few problems:The RFM12B works at a maximum voltage of 3.8v – the UNO runs at 5vI only...

  • Project stalled
  • Log     from RaspBox - Home Automation & Cloud
  • I moved to Norway and didn't bring my remote controlled plugs with me so right now I'm using my Raspberry Pi as a XMPP server. I may move my XMPP server to another server (Fit-PC, already used for an Asterisk server) and use the Raspberry Pi on another...

  • Got feedback on git!
  • Log     from DIY Raspberry Pi MP3-player
  • Wow! unexpected: People actually think my code is impressive enough to comment on! ^_^ Somebody that send feedback about the fact that the library is pretty well written but the default volume (60%) is too low for their taste. While I can't judge their...

  • Project on hold
  • Log     from Project Phoenix
  • This Project has taken a back seat for now. I have got the mint linux working well but the windows crashes often. I got laid off my job not to long ago and now see the need to try and make this system reach its full potential so i can use it as my main...

  • 8gb Ram
  • Log     from Project Phoenix
  • My future wife is awesome because she told me to just go ahead and buy the Ram it can be my early wedding gift from her. So just a few days ago i got online and found 8gb of Ram to replace my old 4gb of ram i had gotten for free. I am happy to report...

  • Mint 16 64bit
  • Log     from Project Phoenix
  • when I started this project I was still very new to linux. I have used it over the years when i needed to for pc recovery and other short projects but having used laptops for many years did not have a true everyday linux system. This project started...

  • Some progress at last!
  • Log     from Mini Laser Cutter
  • Had a Sunday afternoon free, couldn't resist banging something together with whatever I could scrounge from the dustbin outside. Looks pretty cool!:Next, I'll make some proper slide rails, re-build the frame out of something better, add the LASER (a...

  • Getting there
  • Log     from Mini Laser Cutter
  • Gave up trying to write the software from scratch, and ended up going with the same sort of setup as groover on instructables. Inkscape is used to make a design, and a modded version of the lasercutter extension turns paths into gcode.Universal gcode...

  • Reboot.
  • Log     from Controlling 343 stepper motors from Linux.
  • I'm just now unpacking this project and will be restarting development.First, I'll get it all mechanically back together and drive it from a PC parallel port (what's that?) to make sure it all still works.
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday