Close

1448 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メc선릉레깅스룸literary"

  • FlexSEA-Plan

  • FlexSEA-Plan is an embedded computer used for high-level computing. It boasts a powerful processor and can run an operating system such as Linux. Developing code on this platform is similar to the regular (i.e. non-embedded) software development process....
  • Keyboard Driver Almost Done

  • I ended up using the key combination for On and Mode (it seemed appropriate) to change the mode, which basically is between TI-83 keyboard mode for the TI-83 emulator and Regular mode which allows through various submodes access to just about all of...
  • Boostrapping Lights and Sensors

  • So, part of this project will involve creating very fast light pulses (the photo-flashes), and part will be detecting fast optical pulses (the milk drop and bullet detecting photo-gates). The two, of course, are related in that a fast optical pulse generator...
  • Pt.1 Sensor Design and Prototyping

  • Full video on this subject (this is literally the script): https://www.youtube.com/watch?v=Psy6lRcdGtk Introduction Old houses, like my parents’ home, comes wired with simple electromechanical doorbells. They’re a simple electromagnet with a metal...
  • Hack Chat Transcript, Part 1

  • Dan Maloney10:27 AMHi @Kip Daugirdas! Welcome aboard! mark joined  the room.10:52 AM bsigler joined  the room.11:24 AM Alex Mi joined  the room.11:31 AM Alex Mi11:32 AMmy question :) - how people decide between liquid fuel and solid fuel...
  • Project Log 64: DIY Linear Actuator.¹

  • 21/07/2023, Friday, 10:16. For some reason this last week got me too lazy to do anything at all... Well, I will just leave this here and see what I can think of... ----------------------------------------------------------------------------------------------------------...
  • fedex and wildfires

  • It's wildfire season, but Fedex managed to get our boards from Malaysia to us in good time, unfortunately there was a cock up in the ordering department and they shipped to the billing address, we'd left there about 15 minutes before they showed up with...
  • HACKLET 20 – HALLOWEEN HACKS

  • Hey, did you know that Hackaday.io is continuously being updated and improved? One of the coolest features this week is the new LaTeX based equation editor. That's right, you can now put symbols, equations, and all sorts of other LaTeX goodies into your...
  • HACKLET 26 – ARDUINO PROJECTS

  • Arduino is one of those boards that has become synonymous with hacking and making. Since its introduction in 2005, over 700,000 official Arduino boards have been sold, along with untold millions of compatible and clone boards. Hackers and makers around...
  • Hacklet 35 - BeagleBone Projects

  • The Raspberry Pi 2 is just barely a month old, and now that vintage console emulation on this new hardware has been nailed down, it's just about time for everyone to do real work. You know, recompiling stuff to take advantage of the new CPU, figuring...
  • HACKLET 107 – 3D PRINTING PROJECTS

  • 3D printers have forever changed the hardware hacker movement. From the original RepRap project on up through current commercial offerings, 3D printers have become an indispensable tool for hackers, makers, and engineers. While printers may not have...
  • Hackaday.io - Capture & Log Mobile App

  • Keep your existing Hackaday.io projects up-to-date with your mobile device and this companion app. Capture photos of your hardware projects, caption them, and log your project progress. How it works Take a project photo, crop and rotate if needed.Write...
  • PAL Colour

  • I've taken a break from CP/M Plus for the time being so I don't lose interest in the project. I'm currently looking at implementing a colour graphics overlay board. Presently, the colour is generated by an ATmega164P, a 74HC74 flip flop and a 74HC08...
  • Meetups at the HackAspace

  • Before all the building works get underway, we thought we'd squeeze in another little event at the space. We invited SGVHAK to host their regular meeting and we had a little show and tell. Some of the show and tell was recorded:Thanks @James McDuffie...