17 Results for "S 토토추천업체 CDDC7.COM ♪보너스코드 B77♪토토피지컬ྪ피망포커쿠폰☸카지노직업⋔실시간tv중계ڢ토토추천업체사랑 dissimilarity/"

EVA experiences
Log from The perfect mouse pad
EVA has provided good adhesion to laminate desk material when weighed down. A big sheet can be weighed down by the keyboard. The problem is its static cling attracts dirt, but the dirt seems to be shaken off more easily than neoprene. ...

Bad Ideas, Good Ideas
Log from 256 Channel Firework Controller
So, was thinking about actually getting all of these 256 channels broken out to terminals, and the thinking went somewhat like "connect 16 wires to each relay, then distribute". That progressed until I ended up with something like:two relay boards, surrounded...

Storing filament
Log from How to win at 3D printing
is a difficult problem in a $3000 apartment. The lack of space & erratic temperatures make it hard. Rich gootubers can do whatever they want, but storing filament in the ambient air is not an option for us plebeians. It all becomes hydrated & useless....

Little flash, big trouble
Log from DIY JBC Nano Controller
16KB flash should be enough for everybody...... at least that's what I though when selecting the controller for this project. After all, controlling a soldering iron is not a very complex task, so I just got the smallest STM32F0 available. Then I started...

Big Changes, Core Module
Log from Neptune
It's been a while since I had an update on Neptune, but I have been making a ton of progress. I've been focusing on taking everything I learned from prototyping and previous boards and turning that into more effective designs.Most of these changes are...

Figuring out why the CM4 wouldn't boot when attached to my board
Log from Put a Raspberry Pi CM4 into an original iPad
In my previous log entry, I had fried my CM4 by shorting 5V to 3.3V, so I had to order a replacement, which arrived last week. The next thing for me to test is whether I can boot the CM4 on my board, so I installed Raspberry Pi OS and set enable_uart=1...

Figuring out why the CM4 wouldn't boot when attached to my board
Log from [HDP 2022] Put an RPi CM4 into an original iPad
In my previous log entry, I had fried my CM4 by shorting 5V to 3.3V, so I had to order a replacement, which arrived last week. The next thing for me to test is whether I can boot the CM4 on my board, so I installed Raspberry Pi OS and set enable_uart=1...

Parallel Bus
Log from PewPew S2
The displays arrived a few days ago, but I really didn't have the energy to get them working until today. Yesterday I found my Universal Display Breakout Board™ and soldered the display to it. Today I connected a Feather RP2040 to it, and tried to get...

Sensor Integration
Log from My Dalek Build
Sensor IntegrationNow that I have something that is basically working, I thought it would be time to think about how I am going to integrate four sensors to the ESP-12E.The ESP-12E does not have eight free lines after allowance for the stepper control...

Firmware
Log from Flounder Keyboard
In its simplest form, keyboard firmware is not rocket science. You basically need to do three things: scan the key matrix to see which keys are pressed, translate the matrix locations into key codes and modifiers, and send USB HID reports with lists...

Lenovo Thinkpad Supervisor Password - Gotta have a goal if you want to learn something...
Log from Hacking a Supervisor Password - With a Beagle Bone
So far, I have only understood where some Lenovo Thinkpads store their passwords. They are located at 0x380 and 0x400. I interpret this as password and confirmation password. These are seven bytes plus one checksum byte. This is not a CRC. It's...

18th Sept 2021
Log from Obtaining Control of JXD523 : the $20 drone
Hello to of you reading this. Apologies in advance for a lack of in-code documentation. However lets get on with the show. ___________________________________________________________________ To start being able to communicate with this device I determined...

Progress on a Game
Log from Micro:Boy
With the hardware finalized, the remaining work is to actually write at least one game, to prove that it's possible. I decided to make a game inspired by such classics as Dig Dug, Digger and Boulder Dash — you dig tunnels, collect gems, avoid monsters...

Parts Prices
Log from Minamil 2dc: a minimal CNC mill
(update: check/update to current; some $ up again; motor supply consolidation; Amazon link weirdness) Started tracking part prices because they've been a bit volatile and small changes to small prices can be significant. Still tracking because still...

Parts Prices
Log from Minamil: a minimal CNC mill - HaDPrize 2021
[this log entry copied from #Minamil where it was updated 26 Oct 2021] Started tracking part prices because they've been a bit volatile and small changes to small prices can be significant. Still tracking because still changing -- some changes...

1
2
>
>|