8727 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Breadboard prototype assembly
Log from Bottle pomodoro
The code has been uploaded to arduino mini, all components are connected toguether using a single breadboard and jumper cables. Which makes everything a bit bulky. Next steps Reduce size: Ideally this hardware should be all in a single...

Update 9/25/21
Log from SOLAR DISPLAY CASE v2.0
The solar roll is finally here! After patiently waiting months, I received the last piece I need to finish the Solar Display Case. I have put fabrication on hold until I have the panels so I can adjust the monitor frames accordingly to ensure the box...

get the bits in a case
Log from 3DPRINTER MENU BOX
starting to get everything in a case.I think I might need to use 2 x SSR to switch each leg of the 110VAC rather than just one.It just feels safer and could switch double the power.I just have to make some buttons with the 3d printer to poke through...

Week of May 8th
Log from Communication Board For People With Disabilities
Monday through Wednesday we are working on the code. We improved our button matrix and code.We got the CAD finished and ready to check. Our teacher made improvements and told us to do it on Easel Inventables and trace everything using Silhouette...

[X] Setting up Taipo-enabled firmware
Log from AirBerries and SpaceExplorer
[16 Sep] I was thinking that I was going to set this up and then make a log about it, but it's taking a bit of time so I thought a live-running log format would be better. So far, I've tried to implement Taipo.c from a QMK source instead of a QMK->Vial...

Hurricane? Yes. Postal Service? No.
Log from Turtle Sense
So, we got through Hurricane Arthur without a problem, and we decided to send some more Communications Units into the field. We sent them out via the USPS Priority Mail. The units are housed in schedule 40 PVC pipe, which is really, really strong, so...

Confirmed Hardware
Log from Hackaday Prize Worldwide: New York City
We have a massive list of hardware on the way. So far we can confirm the following parts:Atmel XMINI boardsAtmel XMINI boards with 328PAtmel SAM4SAtmel SAM4LAtmel WINC1500 starter kitsTexas Instruments Beagle BoardTexas Instruments WiFi Launch PadTexas...

slide control
Log from Smart Home controllers
a picturewhat i have done here. This are slider controls. i can call them on the fly and put them any where i need them. a bit of code void slidervert(int x, int y){ tft.fillRect(x,y,30,200, BLUE); tft.drawRect(x,y,30,200, WHITE); tft.fillRect(x+13,y+5,5,190,...

DISASSEMBLE JOHNNY FIVE
Log from 3D printer brain retrofit
Sexy upskirt photos of disassemblyOuter housing offBlurry shot of the inside w/ 3 pcbs removedlaid out on the table, next to the smoothieboard (on the right)everything outFront panel, begging to be replacedBack end of the extruder and thermocouplesSmoothieboard...

GPS Jammers?
Log from Averaging many GPSes
For the first test I tried attaching 10 GPS modules (9 GY-GPS6MV1, one GY-GPSv3-NEO M8N) using 10 “CP2102 USB 2.0 to UART TTL 6PIN Module Serial Converter” from ebay on BalanceFrom 10 port USB hub. Everything looked fine at first with...

Getting started
Log from Flight Simulator Radio Panel
Ah, the smell of a new project. Everything fits together perfectly on paper, and no real-world obstacles have been hit yet.As far as communication with Flight Simulator X, it has an API for 3rd-party integration (SimConnect), but I haven't been able...

I am back
Log from Printing bones on a DIY powder bed 3d printer
On monday I have received the results of the exams I had in past two months. This also concluded my high school days and started my almost 3 months long break. This means I will have a lot of free time to work on this project. Even though I had final...

A long time ago...
Log from Internet Of V-Plotters
Well it has been a long time ago since the first and last post... I usually dont document my progress over something (even if it is a great idea, i know). I jst write my thoughts on a sheet of paper, and try to put them in practice. The thing is... i...

After playing around with the board for awhile, a few other changes that I would make
Log from 1284P-Target
Overall, I think I didn't do a half-bad job on the board but there are a few more things that I would change in addition to a reader's suggestion of dedicated headers for I2C and SPI:Move the crystal and its capacitors a little further...

Getting MUCH smaller with more features
Log from Thunder Pack
The new prototypes have arrived!The board now features a 16Mb SPI flash chip and DotStart Micro RGB LED (APA102-2020). These additions were inspired by CircuitPython. The flash chip gives much more space for your python programs and the LED is used...

|<
<
3
4
5
6
7
>
>|