3821 Results for "《 예약문의 OIO↗8489↗8306》청담가라오케П㈄delightfulセ가라오케가라오케νreflected 가라오케사이즈가라오케 가라오케추천㎙가라오케ｑbring㈀"

Assembly
Log from Hexapod
Yesterday two of the larger packages arrived, which include the servos and the chassis. Naturally I had to start putting it together. You can see in the pictures my arduino powered servo centering jig, I figured it would be a good idea to have all of...

Problems arise.
Log from Hexapod
oday saw the completion of the hardware assembly. The whole frame is together with all servos mounted. Unfortunately they shorted me one size m3 screw, so I had to go to Lowe's to get another, and they only had flat head screws. Now my OCD has me twitching...

Not quite dead
Log from Hexapod
So after over three years I thought maybe I should post a bit more information about what went wrong with this project, what worked, and where things currently stand. First, all of the parts worked as advertised after assembly. I wired up all power...

DSKY - The Beginning
Log from Open Source DSKY
DSKY - the BeginningSo that everyone is on the same knowledge level, this section will cover basic knowledge of the DSKY. The image below is the front interface of the DSKY. (Source: The Apollo Operations Handbook)As you can see, the DSKY consist of...

Wire Wrapping Adventures, Hackaday's Space Contest
Log from Open Source DSKY
Sorry for the Long pause in my project logs. To make it up, I’ll post a long project log from then until the day of this project log so you can catch up.Seeing that I'm running out of space on my breadboard, I’ve decided to take a look into wire wrapping....

First Official Video, DSKY Program Breakdown
Log from Open Source DSKY
Now with the hardware aspect completed, it’s time to move onto the programming portion. The video below is the current status of the DSKY. If this goes well, I may consider uploading more video update logs.For people who don't know what is happening...

Status Update
Log from Open Source DSKY
I apologize that I haven't been updating the Open Source DSKY. School started back in August and I've been bombarded with classwork. As of now, the project is currently on hiatus. I've been working on and off on the project when I am on break, or when...

PCB Render
Log from Open Source DSKY
Here's the rendered version of the PCB's, I have yet to send it to the Oshpark but when I do, I'm going send the smallest one (Which is the Micro-controller) first to verify that my Layers are done correctly. There is 3 PCB in total, One is the micro-controller,...

7-Segment Controller Board PCB
Log from Open Source DSKY
yI finally bit the bullet after verifying me design and went and ordered them from Oshpark. The reason why it took so long is because is because it costs me $80 per board (Display Driver, 7 Segment Display), and then $40 for the micro controller Board....

C compiler...sort of
Log from HD6309 Singleboard Computer
One thing that's high on my wish list for the 6309sbc is high level language support. After writing the SD card stuff in 6309 assembly language, for example, it was clear to me that C support would make using the 6309sbc a lot more fun (and easy). I...

PCB v2 is almost ready for fab
Log from The Quub
The PCB v1 has been in use for a while now and some support code has been written to remap a few of the default Adafruit pins to get a second UART etc. During the course of this I had many new ideas and have modified the PCB substantially. It's...

Let's go 16K
Log from C64 Flash Cart
The design has been changed and the cart is now using an IDT7006 16K DPRAM to give better compability with the existing carts out there, now working in the memory space $8000-$bfff. The micro controller auto-switches the cart between 8K and 16K mode,...

Circuit Prototyping
Log from GoPro swivel mount
At first I used an arduino to feed a pwm signal to a stepper motor controller and to take the input from the control box, but that seemed like a huge waste (overkill I mean). So I looked into other ways of generating a pwm signal and found 555 timers...

Set the stage, cue the music
Log from Coming soon...
I have always wanted a robot arm. Youtube Kuka and you'll understand. So in college after building my Photovore (see "things I've built" section of my profile), I bought some servos, wires and the Lynxmotion SSC-32 Servo controller (and arm control software),...

Just practicing
Log from Smart Greenhouse using a Raspberry Pi & Launchpad
It has been quiet the past weeks, although I have been working quite extensively to find out new stuff for both my energy meter and greenhouse. I have been working primarily on the software side of things. I have been using a combination of Python, Flask,...

|<
<
2
3
4
5
6
>
>|