2175 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Design Choices
Log from Pokey Watch
This is just a brief discussion of some of the choices that were made in the design of this project.First and foremost, everything was designed to be fabricated and assembled by me, "in house" so to speak. That meant that any chips had to be hand-solderable,...

time of truth
Log from Mini Tracker
time to see if everything fit on one square inch

hard times
Log from Mini Tracker
looks like everything fits in one square inch, but the pcb is not routed... yet

Rev 1. PCB Assembly!
Log from CRAPi2040
Alright here we go! In case you missed the last log, here it is! Check it out because what you're about to see will make a lot more sense. Just like the last log, this log is going to be a retrospective, but I promise that the next CRAPi2040 log to grace...

Hack Chat Transcript, Part 2
Log from PCB Thermal Design Hack Chat
Mike Jouppi12:55 PM Mike Jouppi12:55 PMOk, here is the board stack up Sven F12:55 PMOK, thank you very much. Your links are already helping me! Do you know any surface mountabe heatsinks manufacturers, too? So far I used some BGA-heat sinks and mounted...

Time to put everything togeter piece by bit
Log from Boosterado LightSquare
A decent amount of craft and prototyping,hacking went to fabricating square matrix of LEDsfirmly attached to massive passive planar square heatsink.Two hacked boost power supplies are tuned,CC power supply frame-heatsink construction under way.all savings...

Camera Test Harness
Log from Occifer Bob Watcher
The camera test harness is built - just need to attach the camera to the base unit, adjust to centre it and then I should be in shape to start acquiring images. This project has highlighted a need for a drill press, table saw, and a t-square....

45hrs - Finishing Touches
Log from PICxie
So I'm putting the finishing touches on everything so I can post it all online for your consumption, the project is done though, so I'm calling this a win. I created a set of labels for PICxie:That should be 1:1 scale by the way, to give you an idea...

Cabinet Portion
Log from Retro Arcade
The past week has been devoted strictly to getting the rest of the cabinet built. I've been having a couple issues with keeping everything square, which isn't necessarily a big deal in the grand scheme of things, but when I get to installing the...

Yet Another Calibration Log
Log from 3D Magnetic Field Scanner
I've been in contact with Melexis regarding calibration and temperature compensation of the MLX90393. They're evidently rationing their application engineers and suggested I contact DigiKey, where I purchased the eval board. DigiKey immediately put me...

[L] The start of the PCB
Log from Tetrinsic [gd0041]
I modelled the 17.5mm square I wanted inside the main Tetrinsic file and then clicked through some menus to make it a PCB border. Then I linked the schematic: The background music of my mind upon seeing all those passives: [00:00 - 00:12] Me: It looks...

Got excited, ordered parts.
Log from GimbalBot
Everything has been ordered to build v08:CFRP: square tube, I-beam, angle, and various plates.Brushless motor stuff: higher wattage motors, ESCs, and spare props.Servo stuff: Servos, mounts, linkages, bearings, shafts, etc.Electrical bits: Battery (the...

MODULE 005 – R-2R
Log from CMOS Modular Synthesizer
R-2R is two "R-2R ladders" in a tight 6HP package. The four inputs act as a 4-bit analog to digital converter that is perfect for generating stepped waveforms to drive oscillators as a CV source or to create more nuanced sounds than the raw square-waves...

Burning some plywood & Square Pixels!
Log from NES Ledtris (LED Tetris)
The led displays are done now. The repo containing all sourcecode and cad files will be public next week.I used the lasercutter at school to create a wooden grid. This grid makes the pixels look nice and square. A white diffuser is placed on top and...

Results
Log from A Cheap 24-bit Differential ADC for Raspberry Pi
I found the circuit to be quite sensitive to external disturbances and noise, so shielding everything is a very good idea. Here's a plot of a 4µVp-p 10-minute-period square wave injected directly into the HX711 channel #1 inputs with gain=128:The...

1
2
3
4
5
>
>|