513 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ《〈 문의 OIO↗5793↗7458 》〉㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

First 2016 update; now with proper fins and a mockup
Log from Arduino rocket stabilization system [UD: 7/14/17]
With 2016 well underway it's time for the first update on the state of the stabilization system!First off, apologies for the massive delays this post has had, was originally slated for mid-Jan launch but between job hunting and other stuff I've been...

Backlog: Switching over to cardboard
Log from Cardboard Hovercraft Robot
I've decided to try out cardboard as an alternative to foam board. The largest incentive for doing this is that I'm now able to use the Laser Cutter to prototype my designs. There's a mantra that I like to abide by when working on projects: fail often...

TRIAL 5-6: Motor, Aggregate-Foam Testing
Log from Type 1 Civilization Builder
My lack of having much remaining time has necessitated bringing on a good friend that also helped in making my CNC router over 4 years ago! I've also spent a whole workday (at work) deciding to scrap an old, well-made, rigid, but easily-overheated AC...

compressor notes
Log from Grizzly G0704 CNC Conversion
So since i added the 30 gallon noisy-ish compressor a few days ago, i thought to myself i'll just install it next to the CNC for the moment since that is the noisy/messy corner. When installing it , i put it on the same circuit as the CNC's motor while...

Soldered up the circuit on protoboard pcb!
Log from GameOfLife_ht1632c_display_AVR
I have decided that this project is mostly done electronics-wise (and probably code-wise since flash is full). So in this decision, I concluded that I sould solder up the circuit I have been prototyping into a more permanent form on a scrap of protoboard,...

First Steps
Log from Cat-644
USPS package tracking: belmont-> san francisco->oakland->emeryville->oakland->emeryville->oaklandI live in oakland. The mail truck is driving in circles!----Well, I have 64k of flash, 4 k of ram and 1mhz 8 bit cpu... blinking an LED.No dev board kit...

Disassembling CD-Rom drives
Log from CO-AFM - Cheap Open source Atomic Force Microscope
Disassembled 3 old CD-Roms I collected from the scrap in order to source linear threaded shafts that can be used for the x, y and z translations in the AFM. Combined with the steppers that have a large gear ratio and low degree of rotation per step this...

Finally a board
Log from Gun Trigger Force Logger
So the piece of scrap copper clad board I drew traces on didn't turn out good at all - when I started scrubbing it with the chloride, the traces smudged away! I relally didn't know that scrubbing it off makes it easier only for toner transfer made PCBs....

8.19.14 CC8520 Breakout
Log from HQ Wireless Audio
Found out that I don't have the means to produce a PCB footprint that is sufficient for this chip at home. I am currently using the toner transfer method. It might be possible to have it printed at a kinko's or something to produce fine enough traces,...

Milling block
Log from Dive Telemetry
I started cleaning up this scrap piece of delrin or uhmw (don't know which). Just ordered a end mill holder for 3/8" bits. I will be happy if I get a perfect rectangular piece as this is the first real machining I have done. The hard part...

part 3: UI and lasercut chassis
Log from DSP 01: hi-fi audio signal processor
(analog signal processor, front panel, circa 2013)the single biggest difference between 'hacky' and 'solid' audio gear is the box it comes in.this isn't just vanity. well-constructed equipment lasts, which justifies its cost in cash and time. you won't...

part 11: (attempted) bass-trapping, Blended Perception Curve
Log from DSP 01: hi-fi audio signal processor
in the previous update, i fretted about the 146Hz node in my listening room, and wondered if i could fix it. you can't just fix it by turning up the gain at 146Hz - it's like pouring sand into a black hole. the problem has to be fixed acoustically, so...

Programmer
Log from Paintball Marker Mount
The circuit boards use pads instead of pins for the ICSP connection, which means I use pogo pins to connect the programmer. I made a handy setup to hold the board in place while its firmware is loaded. ---------- more ----------Unfortunately...

General Design
Log from Robotics for the Rest of Us
General System DesignSome general decisions needed to be made about the overall design before trying to do much. Overall various websites seem to suggest buying robot kits, quality parts, and never trying to build your own servomotor controller. We'll...

"Initial Commit"
Log from Connected Bedroom Hackspace
To date, we've accomplished a great deal:- Hackproofing the room to prevent unecessary damage- Fully furnishing the room with almost every piece of furniture custom made- Developing a versatile yet inexpensive set of tools for the majority of hacking...

|<
<
2
3
4
5
6
>
>|