Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...
Requirements Easily found when misplacedBig enough to hold easily but not too big that it's cumbersomeShould have a battery compartment so that unskilled personnel can replace batteries without having to open up the housingRoom enough for the necessary...
MIKBUG (Smithbug) has the following case-sensitive commands. ; V VIEW MEMORY; E CHANGE MEMORY; M MOVE MEMORY; I FILL MEMORY; F FIND ; D DISASSEMBLE CODE; & S1 LOAD PROGRAMME; G GO TO PROGRAM; J JUMP TO TARGET PROGRAM ; T TRACE PROGRAM; K CONTINUE...
FlexSEA-Plan is an embedded computer used for high-level computing. It boasts a powerful processor and can run an operating system such as Linux. Developing code on this platform is similar to the regular (i.e. non-embedded) software development process....
I've redesigned the way screens/apps are handled and introduced a main menu. More importantly, I have managed to get the average current consumption down to 350-550uA (1.5mA previously)! Turns out a huge chunk of it - 800uA, was a bug in the TWI (I2C)...
On my TI-89, one of the battery contacts on the PCB was heavily corroded and it took a good deal of time and heat to reflow solder to make a new pad. I did this to the V200 as a preventative measure too, but I guess I heated up the nearby fuse to where...
I've been testing the deep sleep mode on the ESP-03. I loaded the frankenstein firmware from here https://github.com/nekromant/esp8266-frankenstein onto the module to test the deep sleep mode.Note, you need to tie gpio15 to GND in order to boot any firmware...
As you can see airodump-ng picked up the WiFi of the drone and also that it is running on channel 2. Next I recorded some packages. sudo airodump-ng -w JJRC_out -c 2 -bssid 10:A4:BE:2E:77:B5 wlan0mon While recording I simply used all the functions the...
This is an overview of the layout in which KGE works. Get User String (Round 0)Split String Into PairsIf Not Enough Then Add Specially Made Character Which Is Deleted During DecryptionUse Byte SubstitutionSwitch User Strings To IDs and Find Replacement...
July was a tough month, and August is no different. Due to some components arriving late, I've only been able to start my work on the Hackaday.io project with considerable delay. So I had to catch up with everything and squeeze the entire development...
Back to the workshop for the revenge of the return of the son of the Vintage Ring Oscillator ! This time with a new ally : the ceramic capacitor ! TL;DR : it's 60% faster ! But the V/F curve might look different from @Tim 's experiments... As usual,...
The amazon fairy dropped off a "NES Classic Controller" and a "Classic Pro"The classic pro comes up as a classic controller, The only difference is the analog R and L on the one I have are buttons and just return the max value when pushed. Although this...
So I want to make some notes because if I don't there will be less notes on the 3d 3 servo experiment, and I had a lot of trouble with the code so I want to get as much trouble into my notes. I struggled with the angle of the hiprotate servo in particular,...
I have continued debugging the hardware mock-up. The fundamental target was to program a simple RPN calculator UI with 6 operations plus a number of scientific functions. The integration with BASIC will come later, after all the hardware components are...
The 5.21E ROM works file with the current board, but the 7.11A ROM uses a different pin for the vertical sync signal. This can be fixed, but then the 5.21E ROM results in no display. Rather than fixing the hardware (with a jumper to be changed when the...