2883 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗퍼블릭룸ㅳ퍼블릭룸connected퍼블릭술집퍼블릭사이즈퍼블릭사이즈paradise 강남퍼블릭Ё４퍼블릭술집farmer"

Hack Chat Transcript, Page 1
Log from Superconference Badge Hack Chat
Andy Geppert 2:39 PM Questions for the queue: What dev environ did you guys use (Linux… tools)? What magic automation was being used when Elliot walked around with the [vintage] laptop and micro USB connection to make “keyless updates”...

Looks more like a camera now
Log from Custom Handheld Pi Zero HQ Camera
Alright I'm done with 3D printing stuff... I was lazier on the 12mm and have had to make either physical changes or reprints. For example the lens cap had a smaller inner diameter than the barrel's outer diameter so it wouldn't fit... dumb....

So it begins
Log from Electric boat/elbåt
[En svensk version finns i slutet av inlägget] Background Two years ago I bought a boat with the hope that someday be able to electrify it. It is a displacement boat of a type called snipa or snäcka which typically has low drag at low...

Motor Options
Log from Realistic Roller Coaster
The requirements for this project are fairly unique. It needs to be a very small motor with precise motion at low speeds while still maintaining decent torque in not that high of cost or weight. More specifically: Size: To scale with, say, a LEGO character...

Taking shape
Log from REST: Kitchen timer
Got first-ish iteration of case rolled out.Initially the idea was to print idler wheels and main encoder wheel to then be taped by something that provides enough friction to stay in place and not give much way and then also transfer rotation to encoder.Turns...

Keyboard Modifications
Log from RETRO 1 - Home Computer Console
The Perixx PS/2 keyboard suggested in the Parts List (PERIBOARD-409) is built to be used on desk and as such has a nice casing already. However, we want to put it in our custom case, where only the top will be visible. So, we need to : Place the keyboard...

Prototype
Log from Delta Printer - Capacitive Nozzle Probe
A prototype design for the probe was created that will clip loosely around the effector platform. Springs will force the probe assembly downward into the bed as the platform is lowered. A 15mm x 15mm copper plate will be used as a capacitive...

Initial Testing
Log from Delta Printer - Capacitive Nozzle Probe
An Arduino ESP32 was setup using touchRead() in the main loop to toggle the onboard led and stream the read value out over Serial. A single 15mm x 15mm x 1mm pad was tested with dial indicator to get a feel for the trigger range. The led...

Mylar V2
Log from Delta Printer - Capacitive Nozzle Probe
A Y-shaped section of black mylar was cut on the laser cutter with some holes to attached to clips printed from PLA. A section of copper foil tape was placed in center of the Y for contact with the nozzle. With the probe clipped onto the...

v 0.1 -- the inevitable first prototype failure
Log from Plasma Toroid (sky-guided PCB edition)
Whipped up a prototype PCB in KiCAD, ordered a batch of parts from Digikey, all set to go, yeehaw.(not pictured in the above schematic: power LED and some other board affordances.)Of course I knew that this probably wouldn't work first-time, but I still...

v0.2 -- First Light!
Log from Plasma Toroid (sky-guided PCB edition)
I'll put the cool part right up top: it works. (and i blew up zero mosfets in the process!)Version 0.2 boards arrived lookin' nice and spiffy. Everyone else I've seen who does a variant on this project uses a primary inductor made either of regular...

Version 0.3 is calm, cool, and collected
Log from Plasma Toroid (sky-guided PCB edition)
Revision 0.3 of the induction driver creates a plasma toroid that's stable and controllable, and does so without overheating. I'm closing in on a finalized version of the driver. Soon, both the induction coil and driver circuit will be unified into a...

Research
Log from DIY Digital Caliper
I was think that I need get my hands on a a caliper first and disassemble it. To be honest I did not get any super interesting information out of that. I just ruined perfectly good caliper. The t-scale PCB is 0.5mm thick and has copper only on one side...

Return to Niche Mountain
Log from The Tile Job
Finally, I've put a little mortar to work, so the tiling is truly underway. I started with the niches, but first I have to confess. Two of my specialties in projects like this are changing my mind and making obvious blunders. My original plan for...

Thinset is messy for me
Log from The Tile Job
People who have been doing this for a long time don't make a big mess like me, but my fingers and even the bottoms of my shoes get smothered in the stuff every day. Mordor ... mortar; get it? BTW, the mortar I am using for this project is Custom...

|<
<
190
191
192
193
>
>|