Close

39172 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

  • Soldering the outputs together
  • Log     from 120v - 1.2v Step-down Transformer
  • De-enameling the leads took too long, scrapping it off with an exacto knife.Soldering everything together was pretty quick.Oddly once everything was connected the voltage output dropped a bunch, by almost a tenth of a volt.Still need to figure out a...

  • Version 1 out for fabrication
  • Log     from Open Source Laser Power Meter
  • I have sent out the first iteration of the design to OSHpark for fabrication. I wanted to get it out the door to have a basic meter available as quickly as possible. My available time will quickly go to zero once August arrives. I added one pull-up resistor...

  • V1.1.1
  • Log     from Raspberry Pi EVSE Hat
  • everything on this board works, so far as I can tell. I was able to write some python to force the relay out line low, toggle the GFI clear high briefly, then turn the relay out line on and toggle the watchdog line at 1 kHz and the little relay light...

  • Hack Chat Transcript, Part 2
  • Log     from PCB Thermal Design Hack Chat
  • Mike Jouppi12:55 PM Mike Jouppi12:55 PMOk, here is the board stack up Sven F12:55 PMOK, thank you very much. Your links are already helping me! Do you know any surface mountabe heatsinks manufacturers, too? So far I used some BGA-heat sinks and mounted...

  • Ready to Begin
  • Log     from Growing of Things (GoT)
  • All the components have arrived. I've started basic functionality testing by creating a wirless reticulation node.So wireless and relay control code is out of the way, now its only everything else to go.

  • the beginning....
  • Log     from Hack your blood vessels! ;-)
  • I started by taking apart a DVD drive and extracted the stepper motor. I took everything out of the pickup (CCD-Array, mirrors, laser-diode) to use it as a kind of transport mechanism.You can check the video here: https://www.youtube.com/watch?v=rcEgp4auuuk...

  • PEP8
  • Log     from KAPCOM
  • Doing some code cleanup and migrating everything to use Python's logger module and PEP8 formatting. I cleared out some of the more confusing bits of code and fixed a bug or two. Keypress buttons are now working again, so that's nice. Fly-by-wire no longer...

  • BMS Logging Completed
  • Log     from goMon
  • Just finished building the BMS logger part, I'm able to get everything from the BMS which as a serial port for a PIC controller that is responsible for the management of the two OZ890. Reverse engineering the bms proved to by harder than I thought, almost...

  • Not my fault
  • Log     from WiFi Remote Controlled Laser Rainbow Maneki-neko
  • Ok, obviously you have to double check everything, when you order parts at Conrad Electronics.Instead of 2.7k smd resistors they delivered 200k, so therefore the voltage coming out of the LM317 was way off.Bodged it now by soldering a 2.7k through hole...

  • Live Performance 1
  • Log     from The Philometer
  • In 2014, Katie and I attended a local art show and created live, personal, biometric art for attendees. We put on lab coats and everything. When people are hooked up to The Philometer they will pretty much tell you anything and the reactions were priceless....

  • Organizing and Such
  • Log     from Monoprice Select Mini Upgrades
  • I didn't like using the logs for work progress. I did wan't the most important stuff at the bottom, so I moved everything to the step-by-step section. I'll just use the log for general comments going forward.

  • Nearly There
  • Log     from Raspberry Pi Jazz Radio
  • This project has had way more setbacks then i ever thought were possible. For the last week or two I've been trying to work with the pi to control the audio on the speakers. Unfortunately the player i'm using (omxplayer) doesn't support volume control...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday