Close

5839 Results for "《 예약문의 OIO↗8489↗8306》가라오케ㅒ청담가라오케sweepご강남가라오케선릉가라오케청담가라오케conviction 가라오케㈛선릉가라오케㎹ㄻ가라오케추천cab"

  • Finally Acrylic is in hand
  • Log     from PixelWand
  • I stopped by Tap Plastic to get some Acrylic.  I bought 4ft x 4ft piece cut in half so that I can fit it into my laser cutter.  I have time scheduled on Tuesday to use the cutter, so I'm ready.Since I still had a couple of the test pieces left,...

  • Frame Assembled!
  • Log     from Simple DIY laser cutter
  • Well the design worked pretty flawlessly.  The frame bolted together quickly and easily and is just waiting on the OpenRail to arrive to finalise the frame.  I will still need to undo a few sections to attach brackets and bearing blocks but...

  • A small design change.
  • Log     from Simple DIY laser cutter
  • I have decided to flip the X axis stepper on top on the X axis.  The reasons for this are I cut out needing 2 idler pulleys and the motor mount can be simplified meaning both motor mounts are the same!  Although I lose a little X axis...

  • GT2 Belt clamp design.
  • Log     from Simple DIY laser cutter
  • I finally got around to designing the belt clamps that will attach to the bottom of my X axis gantry plates.  This is a simple design and will only require 2 screws to keep the belts tight and in place.I will be machining these out of HDPE.

  • Two-core Fluxgate
  • Log     from DC Current Transformer
  • My last project entry described a single-core fluxgate, and showed that it can measure primary currents. It also showed that the fluxgate injects a few hundred mV of ripple into the primary circuit. This entry describes a two-core fluxgate which offers...

  • Pulse Generation Circuits
  • Log     from DC Current Transformer
  • In the last posts we saw how a fluxgate works in simulation.  Simulations are all good when you can just add a pulsed voltage source - everything is perfect.  In the real world, we have some challenges:1) We need very low DC offset to avoid...

  • Testet the X Axis
  • Log     from Homemade PCB-Mill / Laseretcher
  • First Test of the X-axis was succesfull. The axis don't have a belt at the moment, because they didn't arrived at time, but a sholace will works fine ; ). Next step is to Design the new holder for the y-axis linear shafts, with a included beltholder....

  • Set the stage, cue the music
  • Log     from Coming soon...
  • I have always wanted a robot arm. Youtube Kuka and you'll understand. So in college after building my Photovore (see "things I've built" section of my profile), I bought some servos, wires and the Lynxmotion SSC-32 Servo controller (and arm control software),...

  • Pi Supply added
  • Log     from RaspBox - Home Automation & Cloud
  • Just a small project log to say that I've installed a Pi Supply on my Raspberry Pi in order to bring ATX-style power supply to it. The Pi Supply website gives a script to run on the Raspberry Pi to detect a button press from the Pi Supply and halt...

  • Some progress at last!
  • Log     from Mini Laser Cutter
  • Had a Sunday afternoon free, couldn't resist banging something together with whatever I could scrounge from the dustbin outside. Looks pretty cool!:Next, I'll make some proper slide rails, re-build the frame out of something better, add the LASER (a...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday