6067 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Megsy #2 Construction
Log from Megsy? A homebrew Teensy 3++
I've been having some trouble with the first Megsy / Teensy 3.2 / Teensy Audio Board stack, and thought perhaps it would be a good time to try to solder together a 2nd Megsy board. Originally, I had intended to try to hand apply solder paste, and apply...

Update. And a Warning...
Log from Custom Christmas Light Display
My strings of GE Color Effects are quite old - purchased in 2010. Evidently in the past couple of years, they have changed the lights to a style which is not hackable. The new lights have 2 wires per bulb/pixel (one in, one out), which provides...

Chains, sprockets, shafts and bearings
Log from Woody the Electric Four Passenger Bicycle
woody is using BMX cranks because they allow very small sprockets. Below is one of two assemblies before welding. The bottom bracket was turned on the lathe, and the two plates were made by sendcutsend. And here it is bolted in place. The holes...

Prototype Board Design#2
Log from InterNoC
In this log, the first renders of the pcb layout are presented and a major change in the design. First off, the change was that we changed the FPGA package as obviously the 484 pin was an overkill for this design. The package was switched for the 256...

Initial Checkout
Log from Intel SDK-85 Enhancements
What Is It?The Intel SDK-85 is a single board computer trainer from Intel. It is very similar to the MOS (later Commodore) KIM-1 in that it features a keypad and 7 segment display. 2K of ROM and 256 bytes of RAM are provided...

Topic 1: Fundamentals
Log from High Speed Digital & Mixed Signal Design
There is a major limitation with circuit schematics: 3 circuits (with the same schematics) may have significant performance differences which are a result of the physical layout of the circuits. Therefore it can be said that how a circuit is implemented...

Rev 1. PCB Assembly!
Log from CRAPi2040
Alright here we go! In case you missed the last log, here it is! Check it out because what you're about to see will make a lot more sense. Just like the last log, this log is going to be a retrospective, but I promise that the next CRAPi2040 log to grace...

The wiring diagram I used
Log from RC FPV tank rover
This is the wiring diagram I used to wire the L298N driver, Everything is the same except for the joystick.

Last couple bugs
Log from Semisolid Metal Printing
I tried hard oxide coating the aluminum: unlike normal anodization, this process requires high voltage and active chilling, as well as a ramp-up in voltage that is gradual so that the surface isn't porous. Also, it evidently requires a fresh surface...

Progress on the Outdoor enclosure.
Log from SAM - Solar Automation Machine.
Toying around with getting everything to fit in the box, found some wire from an also satellite receiver to connect the relay board. Just a bunch of tired rambling in this one, but it's coming together.

PEP8
Log from KAPCOM
Doing some code cleanup and migrating everything to use Python's logger module and PEP8 formatting. I cleared out some of the more confusing bits of code and fixed a bug or two. Keypress buttons are now working again, so that's nice. Fly-by-wire no longer...

Final PCB Design
Log from ESP IoT Controller
I have access to a small CNC-Milling machine. Therefore I designed an 1-layer board with relative thick traces 0.4mm (15.75 mils). I wasn't able to route everything on the top layer, so I have to use some jumper wires for the bottom layer.

Initial Laser Cuts are Here!
Log from TokiLabs Note
The 3mm thick acrylic cuts for the enclosure have arrived from Pololu, and it seems everything's fitting together nicely. Just waiting for the 6mm cuts now.

fail: pcbs are like gremlins
Log from Towani Lifesign Wristdevice - Star Wars Ewoks
don't feed or order them at night. So the boards for the shield came in today and I placed all the parts facing towards the arduino board instead and missed connecting almost everything with vcc. It's all connected with each other, but not with vcc :D...

Prototyping
Log from JAIOTP
I went out an bought a bigger breadboard today so that I could prototype everything to make sure that it will all work together. The breadboards I have are small so a big one will be nice to have. I took some time to wire everything using wire that is...

1
2
3
4
5
>
>|