13080 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》강남하이킥레깅스룸Χぬscheme하이킥레깅스룸⊂선릉하이킥강남하이킥레깅스룸⑪も강남하이킥they 강남하이킥레깅스룸㈌선릉하이킥ㅼぷpoor"

Previous Version
Log from CNC Mill
I have been working on this project for a long time. Several years ago I build a cnc router using 1" aluminum extrusion, the plastic bearings that slide over aluminum extrusion and a palm router. It was okay and I learned a lot. The biggest problem was...

Printheads and poor planning
Log from Crystal Lamp
After getting totally fed up with my UBIS 13 hotend I ordered the older ceramic hotend from Printrbot. It arrived a few days later, I sent the day calibrating it by printing all the belt buckle pieces for my wife's Han Solo costume for Halloween. Yesterday...

A power supply needs to be rock solid!
Log from Universal BlackBox: the definitive logger
Hello everybody, during the last days I worked at the power supply features set of the proposed device. The project is about a logger that should provide reliable logging and data gathering/storing even in harsh environments hence the design of redundancy...

Razer Junglecat support
Log from Cuttlephone: Gamepad Phone Case
Long time no update. Life has been up and down and I haven't focused on this project lately.Fortunately Junglecat support was kinda easy since I had Joycon rails already. Only took 3 tries. I sliced the model so that the rail tests could print quickly....

Aerodox gets boosted
Log from Aerodox
Well, this is overdue and short. But one of the biggest failings of Aerodox was an extremely poor range to the PC, needing to press a key several times before it would register and sometimes pressing the key resulted in multiple keystrokes on screen.A...

Poor Teletype, I'll Give you a new home...
Log from Hackypuff Jr.
This project started from a desire to save an old 80s teletype that was going to be tossed out. It had spent many years sitting in a back room monitoring a long-dead access control system and probably hadn't been fed paper in so long it's last printout...

More Z80 Hackery Goin' On...
Log from Vintage Z80 palmtop compy hackery (TI-86)
The poor TI-86 has gone from the number-one hacking-platform in my life for nearly a year to now doing little more than crunching numbers I should be able to do in my head...But, I owe it (and @ziggurat29) a debt of gratitude in sealing my interest in...

Beggining commercialization for Stack-chan
Log from Stack-chan - JavaScript driven super-kawaii robot
There has been a long time since my last post. But Stack-chan development was never stopped.The number of Stack-chan developers is still increasing day by day and reached 100 on my Twitter list.This time, I decided to make a collaboration with my belonging...

Update for 20240220
Log from Re-UD-80 - a larger display for Epson PX-4 / PX-8
All the components are finally in and soldered to the new 0.10 board. It was mainly my poor component inventory management and distractions why it took so long. Before testing the new board, I adapted the old 0.8 prototype to the new video circuit,and...

Some problems and limitations
Log from PCB mill for under $10
Although this mill has produced some good results, it has also made some garbage. It would be naive of me to expect this mix of dumpster parts to perform as well or reliably as a proper mill. I don't want to make this sound too discouraging, but I'll...

The future
Log from Open narrowband RF transceiver
The fourth version is alive. Hopefully it will be dummy-proof enough to be programmed without headaches or the need for expensive diagnostic equipment. The following features are being evaluated in this iteration. - Through-hole USB connector – Previous...

Lithium Batteries for This Old Dustbuster
Log from Dustbuster Upgrade
We’ve decided to leave behind both the degraded Ni-Cad battery and suspect simple charger. We will replace them with rechargeable lithium-ion batteries. We have many lithium-ion battery designs to choose from. The different physical form factors...

Get out there...and break an axle!
Log from "Tenacity": Yet-Another-Sawppy-Project
So, after a successful evening roll around the Homebrew Robotics Club meeting, I was starting to drive the rover(Which, in the spirit of other rover names, I've decided to name "Tenacity"), towards the door, when it skidded to a halt. Yup, I broke another...

test fitting and redirection
Log from PCB mill for under $10
Before you glance at the pictures and laugh at my poor engineering skills, read the log.I trimmed several bits of plastic off the print head carriage , made an adapter out of a piece of plastic cutting board from the garbage, and tacked everything together...

Laser Cut Parts Arrived
Log from Stubby the (Teaching) Hexapod
The laser cut frame for Stubby has arrived today, and things look good overall. I made a couple of mistakes, which have since been resolved in the .dxf file: most notably, the braces between each of the femur parts (which, when glued together, will form...

|<
<
1
2
3
4
5
>
>|