Close

2368 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》강남레깅스⒴선릉레깅스룸allowed⑧레깅스룸선릉레깅스룸선릉레깅스badly 레깅스룸견적㎸레깅스룸견적♤ⓩ강남레깅스provisions"

  • Squirrel cage 1

  • 20 years after the arrival of the Hunter 30055, it started squeaking on anything but lowest power.  Lubrication temporarily repaired it, but there's no way to access the motor without replacing the filter.  It's more problematic when humidity...
  • Enclosure concept

  • The enclosure has to do many things.  It has to attach to the F-35 nozzle.   It has to hold the filter.  It has to hold the motor.   The great challenge is the largest panel being dictated by the size of the filter, a 340x265mm...
  • [E3][R] Transparent HMD Options on AliExpress

  • Realising that I had the simple yet inescapable choice to finally look into a strong and stable life-management system or chaos continuum, I started searching around on Friday 24th Nov when I said to myself "I feel that if I set the budget for the HMD...
  • Requirements

  • General Remote monitoring units send identity, temperature and battery level information The frequency of data transmission must be configurable Ambient Temperature Monitoring Use Case Remote monitoring units are able to operate on a single battery charge...
  • LOG 0: Research, thoughts on other DIY Solutions

  • I found out about the BNO085 about an hour ago so I don't have it yet, I will probably begin design work after the new years. I am planning to use the onboard 3DOF magnetometer for translational movements, and the gyro for rotational movements. For the...
  • Illumination

  • The current LED lighting setup is the 4th revision of what started as a $30 light ring from Amazon. Here’s the specs of what I’m using now: 4 high-CRI, super bright, reasonably priced ($3) Cree LEDsBrightness controlled through PWM by a GPIO output from...
  • Mechanical Design and Construction

  • The enclosure for the Photo booth consists of 4 sides made of acrylic and top and bottom caps 3D printed in ABS that hold the whole thing together. It’s not glued or screwed together, just held together by firmly pressing the sides into slots into the...
  • Scintillator

  • Two GAGG(Ce) and three LYSO scintillator crystals next to a TO-92 transistor for size comparisonPhysics overview When a high energy photon (a gamma ray) is absorbed by a scintillator some visible photons are emitted. These visible photons have a fairly...
  • Need Input!

  • We've taken the first steps towards autonomy! Microcontroller and IP-Based Control As most of you know by now, the ultimate goal for Lawnny is to provide some amount of autonomous functionality. But even though I want to automate as much as possible...
  • False Starts, Change of direction?

  • I've been busy working on the PCB and routing on the computer, but while I'm getting much quicker and better at it, I've ran myself into a corner. We're gonna need a bigger board... This project is one of odd anachronistic design choices, pulling in...