Close

2368 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄ 『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

  • HACKLET 98 – UNDERWATER ROVS
  • Log     from Hackaday.io Project
  • A few motors, propellers, a camera, maybe a wire tether, and some waterproof electronics. Throw it all together and baby you’ve got an underwater Remotely Operated Vehicle (ROV) cooking! It all sounds simple on the surface, but underwater ROVs are a...

  • Initial Temperature Testing
  • Log     from Solid-state garduino with RTC & LCD!
  • Coding is my weak point.  As such, when I approach projects as such, I start with the BARE MINIMUM necessary to get the thing to show functionality as quickly as possible.For initial testing, I am simply running the light in the growing enclosure,...

  • Testing, testing, 123...
  • Log     from Solid-state garduino with RTC & LCD!
  • I'm still testing my code.  I'm discovering that I haven't implemented the alarms for the light correctly, so it never turns off/on properly...I have installed a small 12V Fan , cutting a hole for it out of the top of the container. I also drilled...

  • Noise Immunity
  • Log     from Toy Claw Machine
  • Now that there have been a couple events under the belt for this machine: sons birthday party and a carnival, I am looking to make the claw machine more noise immune.  The last event showed a random reset of the machine that would cause it to home...

  • New Enclosure
  • Log     from LED Matrix Fairplay hack
  • The matrix display is being prepared for the Omaha mini maker faire.  It needed to be enclosed to keep prying hands away from the 120V power.  The enclosure was a scoreboard controller box that was saved from scrapping.  This was the perfect...

  • Start of a Project
  • Log     from Candy Tin PC
  • I have had this vortex86 sitting around for over a year now, It was given to me by my work  after it had been removed from a XY glue machine due to it being flaky. Its still flaky and will produce a goblin fart error now and then, but for the most...

  • CANPi v1.1
  • Log     from CANPi
  • I got the latest revision PCB:s from oshpark.com today. This time, I also ordered a laser-cut mylar stencil from ohararp.com. I'm not planning on building lots of these, but I wanted to get more familiar with improvising solder paste printing at home.My...

  • First Post
  • Log     from Reverse Geocaching Box
  • Up until this point, I've been working on it independent of hackaday projects.  I have the whole thing planned out, the enclosure painted, and I hope to finish soldering the circuit tonight.  Once I'm done I plan on posting a build-log.

  • Control box
  • Log     from GoPro swivel mount
  • This is a Radio Shack (I hate radio shack. just sayin') electrical enclosure with holes opened for the momentary switch, power switch, power cable and Ethernet cable (out to motor).  I used a dremmel and a mini mill to cut the holes.  Electronics...

  • Building the 'eye'
  • Log     from HAL 9000
  • This is the project log for the 'eye' assemblyFirst, I hooked up the LED to USB, because it'll eventually be on a raspberry pi.then I needed the lens, so I looked for various round objects, and finally settled on half a christmas light globe.  That...

  • Enclosure and future plans
  • Log     from HAL 9000
  • So, I just got a dremel yesterday, and today's build log will be all about designing and building the enclosure.  I've been off for a while due to a large amount of schoolwork, but now I can get back to designing HAL.  As well as including...

  • Shiny!
  • Log     from Demolition Man Verbal Morality Statute Monitor
  • Finished the enclosure by covering it in metallic paper.  Take a look at the results here: At a craft store I found 12"x12" sheets of metallic paper on thick cardstock that ended up working great.  The thicker size of the material helped...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday