Close

1981 Results for "%E3%80%8A%E3%80%88 %EB%AC%B8%EC%9D%98 OIO%E2%86%975793%E2%86%977458 %E3%80%8B%E3%80%89 %EA%B0%95%EB%82%A8%EC%85%94%EC%B8%A0%EB%A3%B8%E3%81%A3 %EC%85%94%EC%B8%A0%EB%A3%B8%EA%B0%80%EA%B2%A9conspicuous%EC%85%94%EC%B8%A0%EB%A3%B8%ED%9B%84%EA%B8%B0%EC%84%A0%EB%A6%89%EC%85%94%EC%B8%A0%EB%A3%B8%EC%85%94%EC%B8%A0%EB%A3%B8solid %EC%85%94%EC%B8%A0%EB%A3%B8%EA%B0%80%EA%B2%A9%E2%94%82%C3%86%EC%85%94%EC%B8%A0%EB%A3%B8%ED%9B%84%EA%B8%B0derivative"

  • OPS ENUMERATED - Draft

  • This represents a complete OPCODE list with 14 Constants (int values) available and 10 Labels (byte values) available for creating subroutines. Constants were favored over Labels, but this is up for evaluation. NOP and HCF were both added to the official...
  • Control Board FPGA Pinout

  • I might be missing a few connections yet which I'll correct as I come across them, but here is the pinout of the XC3S250E FPGA on the control board.  Note that the SRAM and the Flash share an interface bus.  Also note that the JTAG interface...
  • Theory

  • A laptop keyboard is a diode-less key matrix. Its keys are distributed in a way that you can press the most important key combinations at once, despite the lack of diodes - to the point where some rows only contain one or two keys. Often, there's also...
  • Building a CP/M System Disk

  • Building a CP/M System Disk To avoid rewriting the assembler codes for ccp, bdos and cbios so that they can co-exist in the same file. I can append the i8hex files and remove the "end of file markers". To make the hex file more readable I have changed...
  • Improvement of the EC sensor

  • It is better to read the EC sensor log before reading this one. I wanted to test the stability and accuracy of the EC sensor! So I replaced the EC probe with a fixed resistor (to mimic the resistance of a solution).   The EC probe was replaced...
  • Improvement of the EC sensor

  • It is better to read the EC sensor log before reading this one. I wanted to test the stability and accuracy of the EC sensor! So I replaced the EC probe with a fixed resistor (to mimic the resistance of a solution).   The EC probe was replaced...