90479 Results for "㉣ 피망바둑 ㈍ rka119.top ㅰ 그레잇게임 ㈖ 사설홀덤 ㆌ 포카치는법주소 ㉫ 노리팡바둑이 ㈔ 배터리사이트게임주소 ㈓ 텍사스홀덤추천 ㈚ 맞고게임추천"

Building the PCB
Log from Smart Apartement Ventilation
Now I build the PCP. Left: DC-DC StepDown converter, top right: ESP8266 (Wemos D1 mini), bottomright: SSR relay

V3.2 Update
Log from 150g Drum Spinner 'Legally Distinct'
Small update this time, just added some top forks so that the drum doesn't scrape the ground when inverted.

Liquid Magnetic Clock. Topcase
Log from Liquid Magnetic Clock
Milling the top case for liquid electromagnetic watches. Material oak and mahogany.

Top and Side Interior Views
Log from Expiration Checker (GERALD)

Uploaded SPI Flash Schematic to git
Log from Arduino-Compatible FPGA Shield
I've uploaded the SPI Flash schematic to git. I'll do a video discussing this schematic & the connections between the Flash and the FPGA device @ the top level and how that ties into the backend Arduino and any other top-end boards you might...

PCB (& 3D) ride!
Log from Box0
3D Top - with components (computer generated) 3D Top - without components (computer generated)3D Back - with components (computer generated)Filled TopFilled BackUnfilled TopUnfilled BackYou get the KiCad files from git repo here.2 Layer design, while...

Top of the tree
Log from WS2812 Christmas tree
Now I have added the 193th LED at the top of the tree. A WS2812 8mm LED from Adafruit, which I have ordered a long time ago for testing purpose. After some try and error I figured out, that this LED needs RGB byte order instead of GRB like the WS2812...

AFTER THINKING: 2V5 and 1V8 in TOP PCB instead
Log from Open Source All-In Drone-Droni SAME70Pi (Kopernik)
After thinking, it will be preferable to remove the 1V8 and 2V8 from the bottom PCB. They are used by the RPi CM, and there is risk if IME perturbations.The alternative is that the PCB BOTTOM provides only filtered 3V3 and 5V0. The DC/DC 1V8 and 2V5...

PCB TOP Assembled (part 1)
Log from Open Source All-In Drone-Droni SAME70Pi (Kopernik)
I assembled the following parts of the PCB TOP:- the SAME70-M1/M2 circuits- the headers of the xBees- the connector for front sens- the RPi Cams connectors- the Raspberry Pi compute module socket and circuit- the radio Si4464

Top 20
Log from ColorChord - A Steampunk inspired creation
I just received word yesterday that ColorChord made it into the top 20 for the HCI challenge. Wow, I never thought it would go that direction and I was just about to scrap it for the parts to use on other projects. Guess not :-DNow I need to dust it...

Water Proofing
Log from SEBS (Seebeck Effect Buoy System)
To prevent water from accidentally being splashed onto the circuitry at the top I hot glued a clear cylinder covering from an old tape container to the top of the buoy. For the side of the covering that is facing the USB opening of the Boost Converter...

Newer BNC antenna mount
Log from Yet Another Doppler Direction Finder w/ Teensy DSP
New magnet mount BNC antenna assembly. The through-hole antenna mounts are great. I could weatherproof them by painting with epoxy. Or switch to a top mount SMA and 3D print a top.

Reconfigurations
Log from krex
So, it turns out that the wheels being as close to the chassis as they are, and the footprints of my components, I either had to go with an awkward layout or find another top plate to stack. I decided to go with the latter, and it should be here Monday....

|<
<
3
4
5
6
7
>
>|