90479 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸추천Ⅴ のson선릉셔츠룸ｗ선릉셔츠룸셔츠룸㈜┢셔츠룸implied 강남셔츠룸ㅴ셔츠룸가격ㅂ⑤reached"

#5 - 100 likes on Facebook + unboxing some stuff
Log from MAD 1.1 - Modular Audio Devices
Hey people,yesterday marks the day when the project reached 100 likes on Facebook, and at the same time it's the day when I received the big shipment from China, YAY!I ordered the PCBs from JLPCB and most of the components from their parallalel...

Testing of Prototypes
Log from Dekatron Simulator
This is one of the early prototypes of the Dekatron Simulator. As you can see from the video, the Dek-Sim on the right, triggers the Dek-Sim in the middle once it has reached the zero postion, and the one in the middle triggers the one on the left....

Finally, results
Log from Lerdge 3d Printer Mainboard Hacking
As I went back to basics and began looking at what the output was showing me, i noticed something. If I decrypted a value twice, I got the right entry. This is a fairly good indicator there was a problem with the python script that assembled my hacked...

LCD Screen (22/11/18)
Log from Gesture Controlled Smartwatch
First off, still working on the Arduino front of the project. I have connected a simple 16x2 LCD screen to the Arduino. This will allow the display of the measured data from the FSR (Force) Sensors once I have reached that stage. I do not intend on having...

Results so far
Log from Home IC Decapping
Mechanical shock: failed. Chip destroyed along with package. Will test with smaller hammers.Thermal shock: mixed. Heating with blowtorch until red then dropped in water. Reasonably effective with DDR2 memory chips (large die, thin package). Separation...

Fast Charge
Log from Little Flash
Today is the big day--I prepared to (from a distance) connect 9000 charged farads (8.1 volts) to 1050 partially discharged farads (3.5 volts).Nothing spectacular to report--probably got enough charge (in ten seconds) to run for 20 minutes.Peak current...

More Improvements To Accuracy
Log from Pi Spectrophotometer Tests Olive Oil
I fixed the bug that caused the x-axis to be reversed.I realized that the light wasn't fully coherent when it reached the diffraction grating. (The issue can be seen in the middle of the spectrum image; there is white where there should be green...

PSoC Logic Resources
Log from 3-Chip Z80 Design
I've done quite a few PSoC designs. Some of them have reached the limit of logic that can be placed into the Programmable Logic area of the PSoC. The question is how many peripherals can be emulated in the PSoC before resources run out. Currently I've...

Round corner traces for Flex PCB
Log from KiCAD RF tools
The best practice for Flex PCB Design, when the circuit bend is unavoidable, is to keep the track work as gently curving as possible, using conical radius bends. This goal could be reached both with Round Tracks plugins (being aware to highly discretize...

No much luck...
Log from Let me control you: Hitachi air conditioner
Since my last update, I tried to find sites or specialized shops where I could buy a RAC adapter but failed miserably. I then turned my attention to second hand websites like Ebay or Yahoo auction but also classified ads sites and I've been checking...

DAC/ op Amp config
Log from Tiny PCB weighing 2.5 grams w/ a few features
Today's tasks: Configure DAC: make sawtooth waveConfigure op Amp as c2v converterChoose GPIO and output 100 Hz and 158 Hz square wavesStart designing IR receiver circuit Configuring the DAC wasn't hard, but with the Curiosity board there's a gotcha....

Testing the keypad emulation
Log from MegaPlay
Keypad emulation is working great, either with 3 button or 6 button genesis controller. LEDs are mounted on protoboard to monitor the state of the lines driving the multiplexers. Verified interrupt mechanism to cut the directional outputs when voltage...

Heat!
Log from Huvud, a 3D Printer Tool Head Controller Board
Pushing the poor little board to its limits. It smells funny and I managed to burn my fingers, but it keeps on trucking! The stepper driver protests at these temperatures and stops moving the stepper for short moments. The MCU reaches...

Halfway to melted
Log from SATRAN - Satellite Tracking Antenna
The injection molding machine is going according to plan (so far). Now I am about halfway finished until I can fill it up with ABS pellets and start melting... The tower on top is for the hydraulic piston and the heated nozzle, which is gonna be quite...

The "pick head"
Log from My "pckNplc" machine
After some (about three) iterations I reached the final design of the pick head. It is a very central piece since there are the following components mounted to it:linear bearings incl. NEMA 8 stepper motorsdownlooking cameraled lightendstop for z axisstepper...

|<
<
4
5
6
7
8
>
>|