Close

1568 Results for "smart+outlet"

  • Outlet Guide Vane Finalized
  • Log     from 3D Printed Axial Compressor
  • So I gutted my program and was able to retro-fit it to create an outlet guide vane. I then incorporated it into the clam-shell case which I won't attach a picture of because it doesn't change the aesthetics very much.As stated before the outlet guide...

  • Outlet Guide Vane Rough Calculations
  • Log     from 3D Printed Axial Compressor
  • Alright so I finished doing some calculations on the outlet guide vane parameters. As mentioned earlier, this final vane is designed to "de-swirl" the airflow of the air that's exiting the final stator. The whole purpose of the guide vane is to allow...

  • Outlet, stirrer, and chamber done.
  • Log     from Reagent Robot
  • Got the stirrer assembled (just with wire holding it together for now... need some tiny M2 bolts and nuts). Drive shaft coupled (with some plastic tubing). The chamber is assembled, with an extra layer of rubber at the top to make it high enough for...

  • Access panel for the outlet
  • Log     from A TV Wall to Hide the Cords
  • When mounting the plywood I cut a hole for the outlet, but I don't want it to actually show through the facade. When laying out the bottom few layers of boards I made sure that two of them lined up well for access and I didn't glue these in place.These...

  • Outlet RF remote wifi control
  • Log     from Smart Apartment HVAC
  • I got some RF remote control outlets to run the fans without having to build custom 120V stuff, and, to avoid wifi outlets where I'll havre to use some stupid API or bounce it through some "cloud" service.  Spent most of today reverse engineering...

  • Air inlet/outlet valve concept (VOTE)
  • Log     from Plant pod
  • Here are some of the air inlet/outlet design concepts, help us to choose wisely... 1. Vader 2. Eve 3. Bee hive  ---------- more ----------More images and details This is a cross section of the modular air IO valve, with 30x10 mm PWM fan (Not shown...

  • Smart Servos
  • Log     from Sly Bug
  • Hobby servos were not designed for robots – they are mainly for remote-controlled airplanes and boats, and they were created back in times of analog radios, when PWM signal was the easiest to multiplex. While they are relatively cheap and convenient,...

  • Get smart
  • Log     from Simple Digital Mode Transmitter
  • Took a little time to transfer the Arduino/DDS circuit to a bit of copper-clad board but I'm glad I did because it looks much neater.Still regularly trying it on 20m, 15m and 10m bands, using WSPR and FT8 modes. Regularly hitting 900-1000km using WSPR,...

  • Securing the outlet tube and a little Welding
  • Log     from Syringe Pump
  • My plan is to use a length of plastic tubing to deliver the output of the syringe to either the extruder or the mixer. That way, the syringe doesn't have to be mounted on the carriage of the printer. The thing that's always worried me is how to connect...

  • Smart Garden Mini
  • Log     from The Smart Garden
  • If The Smart Garden is the platform for an IoT gardening system parent, then it needs some children to receive its knowledge. Below is the Smart Garden Mini. I will create a new project to track the Mini so as to avoid confusion.- Explanation of its...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday