87 Results for "3D printing"

RigTig's Big 3D Printer
Project by RigTig
A DIY 3D printer (big volume, inexpensive, lightweight and portable).
- 4.6k
- 75

Highly Configurable 3D Printed Helmholtz Coil
Project by ChasinSpin
Design for 3D printed Helmholtz Coil that can be configured for any wire size, number of wraps and magnetic strength
- 5.2k
- 25

Desktop Arcade Machine : 3D Printed + RetroPie
Project by Christopher Tan
My attempt to build a desktop arcade machine by 3D printing the cabinet and using Raspberry Pi 3 running RetroPie.
- 4.3k
- 105

Recycling Household Plastic for 3D printing
Project by EM
I'm attempting to recycle my household plastic into usable 3D printer filament
- 2.2k
- 14

WiFi Motion Sensor (3D print) - DIY
Project by Sylwester
We show how to build IOT WiFi Motion Sensor powered on a battery with email notification over IFTTT.
- 1.8k
- 13

3D Printed Flying wing FPV Drone
Project by K+
In this project, the objective was to build a FPV flying wing with over 700mm wingspan that could be printed under 24 hours.
- 825
- 18

Goats vs Llamas - a New Downloadable 3D Board Game
Project by jude_pullen
This game is an exploration of how much you can do by downloading a game - using both a paper-printer and a 3D printer.
- 4
- 6

Programmable color filament (thermochromic)
Project by mmiscool
Print 2 color objects from a stock unmodified 3d printer using the hot end temperature to set the color.
- 1
- 5

Printing full colour 3d models with a double Prusa
Project by Aad
A combination of fdm and inkjet printing to make full color 3d Models.
- 3
- 3

3D printed Motorcycle Choke
Project by Jonathan
Parts for my motorcycle are getting harder to find and when the original choke lever broke I 3D printed a replacement.
- 831
- 7

Improved Allen Wrench / Hex Key Holder
Project by Alex Rich
3D Printed holder: Allen wrenches are held in a circle by a single o-ring, all individually accessible.
- 906
- 48

Easy Build my own useful Robot For Less Than $100
Project by Sergey Mironov
you can make your telepresence robot (Arduino based) if you go through the steps below
- 536
- 4

Quadruped robot with 22 DoF
Project by Dimitris Xydas
This is Quadbot 17, a work-in-progress quadruped robot with 22 degrees of freedom, based on Robotis AX-12 motors and a 3D-printed chassis.
- 94
- 66

Bandsaw insert
Project by hans109h
Stationary bandsaw table insert for Craftsman 12" bandsaw
- 2
- 4

Omnibotler
Project by Jarred
Updating an Omnibot 5402 to serve as a home automation hub and home "assistant"
- 3.2k
- 14

1
2
3
4
5
>
>|