100 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》텐하드레깅스№텐하드레깅스goods텐하드텐하드레깅스룸텐하드레깅스룸race 텐하드레깅스룸ｏ㈅텐하드레깅스룸voice"

Voyage 200 Upgrades
Project by Michael O'Brien
Following up with nearly a decade old thread about overclocking TI's V200 with a bit of a twist
- 24
- 7

IV Warming Pod- Field Ready
Project by John Loeffler
Using Cheap, Stackable, rechargable and Readily Available Components to warm IV Solutions.
- 11
- 13

8 Channel Data Acquisition System
Project by piplay
An 8 channel differential input data acquisition system built as a Hat for a Raspberry Pi
- 4
- 5

DIY Stream Deck With Raspberry Pi (PiDeck)
Project by TurkeyDev
Stream Deck, but utilizing various Raspberry Pi's!
- 4.6k
- 15

Back Drive-Able Linear Actuator
Project by Sean Cain
Linear Actuator that uses a cable drive.
- 1
- 1

TLBS Curtains
Project by E/S Pronk
Using threadless ball screws to open and close curtains, the elegant way.
- 4
- 7

Roomba RPi
Project by Josh Gadeken
iRobot Roomba 690 enhanced with a Raspberry Pi Zero 2W and IMU.
- 338
- 35

Nixie Clock Controller
Project by Daniel He
A (nearly) universal, open source, 6-digit nixie clock controller.
- 2
- 6

Reimplementing a 1 bit CPU
Project by Ken Yap
Learning the MC14500B Industrial Control Unit
- 7
- 5

MuDRA - Multipurpose Domestic Robotic Arm
Project by Sagar Sanjay Shenoy
MuDRA is a 3+ DoF non-mobile robotic arm that can be attached to any hard surface and assist in household work or as a stand to hold things.
- 4
- 5

1 - bit ttl / cmos finite state machine
Project by Dave Collins
a finite state machine based on the MC14500 Industrial control unit.
- 5
- 8

Baffa-1 Homebrew CPU Minicomputer
Project by Augusto Baffa
The Baffa-1 is an 8-bit CPU created from scratch using 74 series logic gates and built using custom printed circuit boards.
- 33
- 38

Khaosgun
Project by ReidDye
a wifi or ai controlled sentry nerf gun
- 2
- 1

XpandShield MK II
Project by CDR_Xavier
Maybe the most expansive Joystick Ever
- 0
- 0

Raspberry Pi Synth
Project by Stephan Bourgeois
The synthesizer is composed of three basic parts. There are two midi control boards based on the TM4C123GXL launchpads and a raspberry pi.
- 2
- 4

1
2
3
4
5
>
>|