71 Results for "%E3%80%8A%EC%98%88%EC%95%BD%EB%B2%88%ED%98%B8OIOX8489X83O6%E3%80%8B%EA%B0%95%EB%82%A83hours%E2%92%B03hoursbreak3hours%EB%A0%88%EA%B9%85%EC%8A%A43hours%EB%A0%88%EA%B9%85%EC%8A%A4%EA%B0%80%EA%B2%A93hourscruelty 3hours%E3%85%A0%E2%93%9A3hoursinn"
Before I can proceed with the debouncing circuit, I have to evaluate the characteristics of the transistors and choose the lousiest (debouncing is not a critical circuit). Fortunately I had built a board for manually Testing Germanium transistors. Remark:...
As you can see airodump-ng picked up the WiFi of the drone and also that it is running on channel 2. Next I recorded some packages. sudo airodump-ng -w JJRC_out -c 2 -bssid 10:A4:BE:2E:77:B5 wlan0mon While recording I simply used all the functions the...
I'm in the process of making a small program to read the control input from a USB gamepad and send the commands to the quadcopter but first I wanted to make sure I got the UDP protocol right. Therefore, I wrote a small Python script that can be combined...
Finally we got to post on Hackaday! We're back from Makerfaire - it's been a very busy time. Lots of people (20+) tested our device in the field, so to say, and ironically, it could be considered a stress testing for our device, though we couldn't measure...
"...O frabjous day! Callooh! Callay!' He chortled in his joy."Today I finished porting the code to the Olimex Duinomite Mini board, so now you can have your emulator for about $25 USD (for what we paid upwards of a couple grand in the day), and soooo...
FInally got a HB9CV antenna, a BNC cable and a corresponding adapter to my RTL-SDR. I've put the antenna onto a servo and 3d printed an adapter, the whole setup looks like this:The beacon was quickly wired on a breadboard. The antenna does not have the...
As the misery spreads, it seems only fitting that we should recognize those who are unfortunate enough to suddenly complete the SMD Challenge. To be included in this club, you must submit photographic evidence (or link thereof) of a working SMD...
Many pcb projects are in progress to run KaraDio. Dimitris works on a pcb with esp8266, the external ram and the vs1053 with the complete set of option by juumper (a0 and type of ram).I hope he can sell it soon (with mounted components). discover1977...
A clock built with eight authentic soviet vacuum fluorescent display (VFD) tubes, a custom designed circuit board, firmware and 3d-printed case It is an evolution of Phalanx. Many of the firmware improvements made for Ameise also trickled down to Phalanx...
I've tested the module outdoor for about two weeks and it works great. Yesterday was the coldest night (-17.8 °C), and it passed without any issues. Additionally, I'll double-check datasheets for each component to validate the temperature range,...
... which turned to have the following short answer - to pull down with a 680 kOhm resistor. For a detailed answer---------- more ----------we need to acknowledge that a floating input of the ADS1x15 results in a rather high voltage reading. Therefore...