105 Results for "∇ 최저가 Ò1Ò《⑤⑦93》74⑸⑻ ∇런닝래빗가격β런닝래빗주대result런닝레빗가라오케주대런닝래빗주대런닝레빗가라오케주대voyage 런닝래빗가라오케ㅅＧ런닝레빗가라오케주대indies"

Baffa-1 Homebrew CPU Minicomputer
Project by Augusto Baffa
The Baffa-1 is an 8-bit CPU created from scratch using 74 series logic gates and built using custom printed circuit boards.
- 33
- 38

IV Warming Pod- Field Ready
Project by John Loeffler
Using Cheap, Stackable, rechargable and Readily Available Components to warm IV Solutions.
- 11
- 13

8 Channel Data Acquisition System
Project by piplay
An 8 channel differential input data acquisition system built as a Hat for a Raspberry Pi
- 4
- 5

DIY Stream Deck With Raspberry Pi (PiDeck)
Project by TurkeyDev
Stream Deck, but utilizing various Raspberry Pi's!
- 4.6k
- 15

TLBS Curtains
Project by E/S Pronk
Using threadless ball screws to open and close curtains, the elegant way.
- 4
- 7

Nixie Clock Controller
Project by Daniel He
A (nearly) universal, open source, 6-digit nixie clock controller.
- 2
- 6

Reimplementing a 1 bit CPU
Project by Ken Yap
Learning the MC14500B Industrial Control Unit
- 7
- 5

MuDRA - Multipurpose Domestic Robotic Arm
Project by Sagar Sanjay Shenoy
MuDRA is a 3+ DoF non-mobile robotic arm that can be attached to any hard surface and assist in household work or as a stand to hold things.
- 4
- 5

1 - bit ttl / cmos finite state machine
Project by Dave Collins
a finite state machine based on the MC14500 Industrial control unit.
- 5
- 8

Khaosgun
Project by ReidDye
a wifi or ai controlled sentry nerf gun
- 2
- 1

XpandShield MK II
Project by CDR_Xavier
Maybe the most expansive Joystick Ever
- 0
- 0

Raspberry Pi Synth
Project by Stephan Bourgeois
The synthesizer is composed of three basic parts. There are two midi control boards based on the TM4C123GXL launchpads and a raspberry pi.
- 2
- 4

Tetent [gd0090]
Project by kelvinA
An input device for quickly entering text and equations, gaming, drawing and cursor/6DoF movement.
- 16
- 15

SecSavr Select [gd0091]
Project by kelvinA
Compact filament selector for 8 FFF printer filaments.
- 0
- 0

Review 015: RoyalOHM 10K Ohm Carbon Film Resistor
Project by Electorials
A review of the RoyalOHM 10K Ohm 1/2W 5% Carbon Film Resistor from Tayda Electronics.
- 2
- 1

1
2
3
4
5
>
>|