30 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

BradWii on the Hubsan Q4
Project by ajlitt
In which the author runs open source firmware on a palm sized quadcopter
- 62
- 29

Digital Electronic Clock Temperature Voltage Modul
Project by icstation
1.Electronic calendar 2.Digital clock 3. Environment temperature detection
- 755
- 16

biohand - Low cost 3D printed hand prosthesis
Project by Martin Vincent Bloedorn
Development of a robust low cost 3D printed hand prosthesis using off-the-shelf components.
- 3.5k
- 68

Soft Propeller
Project by Antti Lukats
DIPFORTy1 "Soft-Propeller" Zynq-7, Dual CortexA9+ FPGA DIP40 Parallax Propeller I compatibles footprint
- 152
- 91

AND!XOR DEFCON 24 Badge
Project by Zapp
Building our own electronic badge. ARM Cortex M3 and Arduino based
- 1.2k
- 84

DiXi - arduino sam D11 usb stick
Project by bobricius
atsamd11c14 Arduino zero compatible ARM M0 compact usb stick
- 204
- 95

SunLeaf
Project by AVR
A solar powered wireless picopower sensor module with cloud Datalogging and control geared towards agriculture and environmental monitoring
- 520
- 145

project gaming mouse the ms inteli 3.0 of 2016
Project by Omar
lets build a mouse
- 0
- 0

Aiie! - an embedded Apple //e emulator
Project by Jorj Bauer
A Teensy 4.1 running as an Apple //e
- 169
- 162

PD Buddy Sink
Project by Clara Hobbs
Smart power jack for USB Power Delivery
- 171
- 163

ROSbot - autonomous robot platform
Project by Husarion
Open source & connected universal robot platform. ROS-powered. Sensors: LIDAR, camera, IMU, encoders, distance sensors. 4 DC motors.
- 209
- 111

Getting a Voice Again After Voice Box Surgery
Project by Michael
Improving the "electronic larynx", a device used for speaking by cancer patients that have lost their natural ability to speak.
- 266
- 2

SNES DRONE
Project by Foxchild
A cartridge for the SNES (Super Famicom) that uses the built-in wavetable chip to finally turn the console into a synthesizer!
- 34
- 31

Atlas - 6DOF 3D printed universal robot
Project by Damian Lickindorf
An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.
- 2.3k
- 562

Beaglebone CNC controller
Project by Victor
Attempt to build a 4 axis CNC controller from the Beaglebone black
- 555
- 6

|<
<
1
2