458 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

Monitor Arm | 75mm VESA
Project by Jacob Nichols
3D printable monitor arm for 75mm VESA Mount Monitors
- 3
- 3

One week build: Slides Digitizer
Project by Christian
A small project to digize slides (Diapositive, Dia in German).
- 4
- 4

Arduino Morse Code Station
Project by Mario Gianota
Morse code with an ATMega328P and OLED display.
- 0
- 1

Halloween Candy Mortar
Project by Paul McCabe
Candy in a 35mm film container is launched towards a trick-or-treater when they step on a foot pedal 50 feet away from the launcher.
- 13
- 18

MiniHawk VTOL
Project by Steve Carlson
A fully 3D-Printable VTOL aircraft, designed as a hybrid fixed-wing plank + tricopter planform. For FPV and UAV experimentation.
- 222
- 170

DIY Handwashing Station Parts
Project by Josh Berliner
pump and connector parts
- 0
- 0

Soft Soldering Jig
Project by Inne
Circuit sculpture jig consisting of a vacuum pump attached to a silicone pad to keep rods and SMD components in place when soldering them.
- 28
- 37

Slide Clock
Project by Craig Colvin
This clock uses 4 vertical slides that contain the numbers and stepper motors position the slides so to display the correct time.
- 338
- 15

EuroRack 9V/12V Pedal Regulator Breakout Board
Project by Neil Mundt
Allows You too Run Pedals or Circuit bent toys off your main 12v power supply in a Eurorack setup.
- 2
- 0

Bluepill Serial Monster
Project by Kirill Kotyagin
3 Port USB to Serial Adapter Using STM32 Blue Pill
- 7
- 6

3D-printable shredder
Project by Brian Brocken
An almost completely 3D-printable shredder that can be used to shred 3D-prints ;-)
- 58
- 60

A Simple Electrochemical Machining Project
Project by bob
A working and somewhat practical demonstration of ECM
- 11
- 9

Open Flow Meter
Project by Eben
An Arduino powered flow-meter for use in geography river studies and environmental monitoring projects
- 24
- 23

DIY injectionmolding for everybody
Project by Bolzbrain
Solution do build the simplest/cheapest injection molding press that is capable of 60g+ material injection.
- 19
- 22

Particle IoT: Outdoor Weather Displayed Indoors
Project by mikesoniat
Capturing outdoor weather conditions using a Particle Boron (cellular) and displaying them on an OLED indoors using a Particle Argon (wifi)
- 0
- 0

|<
<
1
2
3
4
5
>
>|