104 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

Free drive or High Passability Differential
Project by Evgeniy An
It has free - not fixed transmitting ratio. Which allows to use like Differential
- 0
- 0

BT Deauth... KILLER ;-)
Project by Lordvetinari
Stop Bluetooth easy!
- 78
- 0

3D Printed Ballscrew Linear Actuator
Project by Anthrobotics
Developing a cheap DIY alternative to expensive machined ballscrew actuators (with a little less precision). For humanoid robots.
- 831
- 4

PSOC for Measuring Social Distancing
Project by Deniz Taşkın
PSOC IoT Cloud Gateway for Measuring Social Distancing
- 6
- 7

The Unified Field Theory
Project by bRad bIll bUsch
e=m/(on/off)c^2
- 1
- 1

HOW TO SETUP THE ARDUINO MKR 1300
Project by EnrgTech
The Arduino MKR 1300 comes equipped with the ATMEL SAMD21 bridged with a LoRa module thus allowing for remote IoT applications for instance
- 0
- 0

Lookup Table ALU
Project by Ken KD5ZXG
Optimized tables to occupy a 20addressbit x 16databit device
- 4
- 5

Railcore 600
Project by Dmitry Shevchenko
This railcore ii 300zlt based project is extended to 600x600 bed size. It require change rails, screws, profile size & some others.
- 5
- 2

DSP Audio : 4 OUT - 2 IN
Project by aymen
I thinked to made an electronic device that used for audio treatement
- 744
- 3

iSight II
Project by Tyler Stevens
Breathe new life into a aging camera that behaves [almost] like the original.
- 2
- 4

Repurposing Fluke Optiview Network Analysis Tablet
Project by Jay Phantom
The goal of this project is to determine the feasibility of reversing and repurposing surplus network analysis hardware.
- 1
- 1

Remoticon: Printing Precisely Demo
Project by Eric Moyer
Printing Precisely - Desktop 3D Printer Calibration
- 9
- 7

Scrapper's Reference Guide
Project by Ramsey
The goal of this project is to put together a reference to what common devices and junk have what common components!
- 1
- 1

DIY Linear Motor Experiment
Project by h2w
The linear motor was a compact, ironless design with flat coils and magnets. It was intended for use in experimental haptic applications.
- 5
- 4

Aeropress Coffee Maker Sustainable Glass Upgrade
Project by Luke
Keep compatibility with existing paper filters and hardware, but replace the leaky cap and tube with glass, so it won't wear out.
- 4
- 5

1
2
3
4
5
>
>|