In the arduino code set your WiFi credentials char wifissid[] = "ENTER YOUR WiFi SSID HERE"; char wifipass[] = "ENTER YOUR WiFi PASSWORD HERE"; Normally, the signal strength is displayed in dBm. But for a non techie person, the signal strength in terms...
Wrote a very basic command interface with three commands:W - Write the EEPROMR - Read the EEPROMB - Bounce an LED across the RPP-UIO-16 cardThe result looks like this:Write to the EEPROM Read from the EEPROM 0000 00 01 02 03 04 05 06 07 08 09 0a 0b 0c...
1. Toolchain not found After stepping away few days far from my PC for family reason, I resumed my activities on the Tsykuyomi project.So I started by reading the https://github.com/WHhkwong/SIPI_Bear_playback code and looking for a SNC7001A Toolchain/SDK...
The STM32 board was just a hair bigger than the PIC, but the biggest pieces are still the power switch, channel button, & battery. The plan is just to print an L enclosure which scotch tapes around the hot shoe & sticks up. The antenna will...
After a fresh installation of Debian on my Beaglebone Black I was greeted with a console interface that had all the essential tools already installed. It's a development platform after all. They provide everything for I2C devices as well. I had a 24C02...
With the wiring complete I wrote a small program in Python to test the lights, buttons, and switches on the front panel. To be clear this is NOT the KENBAK-2/5 emulator running a program (yet). As it turns out I did have to replace one of the LEDs...
I've been hinted at this 43 years old project from Elektor:https://archive.org/stream/Computer74/computer-74It's exciting that this idea has been in the air for so long, and yet we don't see it widely spread...