Tarek Loubani10:28 AMYou might remember Christoph from such hackaday articles as https://hackaday.com/2017/06/30/3d-printed-halbach-motor-part-deux-tuning-testing/ and https://hackaday.com/2014/05/24/the-hour-of-the-3d-printed-clock-draws-nigh/ Tarek...
riley.august12:42 PM@Seb Lee-Delisle Sorry, I've been a little slow to keep up. Okay, so it's actually the same kind of interlock we use on ours, but our industrial lasers are connected to a tilt switch. So yours are connected to the estop signal pin,...
Dan Maloney12:00 PMOK everyone, let's get started. We're excited to have Ben Krasnow on the Hack Chat today. Welcome Ben! Ben Krasnow12:00 PMHello! Mike Kennedy12:01 PMHi! Kendall Meade12:01 PMhow's it going :D Boian Mitov12:01 PMHello everyone :-) krux12:01...
alexwhittemore12:25 PM@Abhishek Viswanathan this seems to fit neatly along those lines: https://www.seeedstudio.com/Smart-Citizen-Kit-p-2864.html Mark VandeWettering12:26 PMBen: Kind of shocked you haven't heard of them. Very cool series, more for teaching...
Welcome everyone, time for the Gigatron Hack Chat. I'm Dan Maloney, I'll be the moderator today. I want to welcome Walter Belgers to the chat today to talk all about the Gigatron. Walter, thanks for coming on in what must be a difficult time. We were...
OK, here we are at the top of the hour with a lot of new virtual faces. I'm Dan, I'll be your mod today. Let's welcome Mike Gardi to the Hack Chat today, to talk about the wonderful pieces of early computer history he recreates from scratch. Hi Mike!...
OK, welcome to the Hack CHat. Had some trouble there for a bit, but we're good now. I'm Dan, I'll be moderating today. Let's welcome Tim Ansell to the chat to talk about SkyWater PDK Michael Gielda12:01 PMHi! Testing :) Oh right - and Michael Gielda,...
OK folks, let's get going. I'm Dan and I'll be the mod today for Dalibor Farny, who we're very glad to welcome to the chat. Hi Dalibor, thanks for joining us today. Can you start us off with a little about your background and how you got started in Nixies?...
OK, let's get started. Greetings all, and welcome to the first Hack Chat of 2021! I'm Dan and I'll be the mod today as we welcome back Lex Kravitz, whom we've had on a few times but never before to talk about Plant Communications. Lex, are you out there...
OK, all, we've already got a good discussion going, but let's kick things off "officially". Welcome all, I'm Dan, and Dusan and I will be modding today as we welcome Jonathan Schwartz to the Hack Chat. And I apologize in advance if my fingers get wrapped...
Dan Maloney12:00 PMOK, let's get going. Welcome, one and all, and thanks for coming out today. I'm Dan and I'll be moderating today with Dusan as usual as we welcome Eireann Leverett to the Hack Chat to talk about SCADA Security. I've really been looking...
Bill S12:25 PM@primetimber Ture, Then when everything goes to hell, the board gets a new CEO who says that last guy was the worst and continues to do nothing. Think VW Chris Ryding12:25 PMWhere do you tend to see more security vulnerabilities - insecure...
Dan Maloney12:01 PMOK, looks like we're right at noon, let's get started. Welcome to the Hack Chat, I'm Dan and I'll be moderating today along with Dusan as we welcome Kyle Donnelley to the Hack Chat. Nicolas Tremblay12:01 PMWow, it must be me then Dan...
Top 3 struggles I have with robots and how this project solved them. 1) Cost too much. Mostly because of expensive servos and high end processors. - Designed a cheap driver/sensor board to read the absolute angle of the motor joint and run the...
Dan Maloney11:09 AMHi all, Hack Chat starts in about 50 minutes: Dan Maloney11:09 AMhttps://hackaday.io/event/181633-robot-dogs-hack-chat HACKADAY Robot Dogs Hack Chat Afreez Gan will host the Hack Chat on Wednesday, September 29 at noon Pacific. Time...