302 Results for "3D%20printing"

biohand - Low cost 3D printed hand prosthesis
Project by Martin Vincent Bloedorn
Development of a robust low cost 3D printed hand prosthesis using off-the-shelf components.
- 3.5k
- 68

DIY Polishing Station for 3d-printed Parts
Project by chiz
A DIY polishing station to smoothen 3d-printed parts built using Arduino and portable humidifier.
- 2.5k
- 30

3D-printable high torque servo/gear reduction
Project by Brian Brocken
with only 8 3D-printed parts, this servo is very easy to assemble and very robust.
- 67
- 61

Atlas - 6DOF 3D printed universal robot
Project by Damian Lickindorf
An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.
- 2.3k
- 562

3D printed BLDC servo with 30Nm torque ($60)
Project by Navid sabet
This is a high-torque yet affordable servo motor including a low KV BLDC motor, 3d printed planetary gearbox, and BLDC driver
- 49
- 43

(8:1) 3D Printed Planetary Gear Actuator Module
Project by Dongil Choi
3d printed 8:1 planetary gear ratio actuator module with VESC firmware based circular motor driver
- 43
- 40

Upgrade your 3D printer from 8bit to 32bit
Project by robert
The latest marlin had ported to stm32 board,everything works, stable and smooth,have BLTouch,etc.
- 509
- 176

3D Printed PCB mill
Project by DTeel
3D Printed components and other hardware to make a PCB routing machine, which inherently can do other things.
- 5.7k
- 108

3D printed "Magic Spring"
Project by mpclauser
I made a "Magic Spring"(slinky) on a 3d printer.
- 15
- 16

3D Printed Axial Compressor
Project by noob_sauce
An axial compressor that is designed to be produced inexpensively by the daily hobbyist
- 145
- 99

3D Printed BB8 Quadcopter
Project by DrYerzinia
A full scale BB8 Astromech droid with deployable quadcopter arms in the shell.
- 8
- 4

Multi-audio 3D
Project by denis.ulric
this is a application on Raspberry pi who allow a client to call via RAW socket to send a sound via a json in 4 sound card simultaneously,
- 1
- 1

Ultrasonic 3D Positioning System (GPS)
Project by Gabriel Staples
I plan to use 5 Arduinos, or similar, to trilaterate 3D position using ultrasonic (or possibly audible) sound waves.
- 32
- 12

Arcus-3D-P1 - Pick and Place for 3D printers
Project by Daren Schwenke
Open source, mostly 3D printable, lightweight pick and place head for a standard groove mount
- 128
- 112

3D-Printed 6-Axis Robot
Project by Pascal Zwick
Building a 6-Axisrobot with 3D printed parts and a arduino controller.
- 3
- 0

|<
<
1
2
3
4
5
>
>|