11 Results for "3D%20printing"

Biomat 3D Printer Conversion
Project by Albert Latham
Biomat >> 3D Printer
- 1.3k
- 2

Electrospinning Machine
Project by Douglas Miller
Bring an open source electrospinning machine to the hobbyist level. Made with easily sourced and inexpensive materials.
- 449
- 64

Jadoo's All in one
Project by Eric (Jadoo)
An all in one DIY lab in a box 3d printer, laser cutter Heated Chamber and Exhaust removing enclosure.
- 35
- 7

3D Print Components
Instructions from Star Trek Shuttle Console
Parts To Print PARTMATERIALMETERSTIME*Speaker CoversBlack PETG 1.5014mPower Grid CoverIsolinear Chip Bay CoverBlack PETG25.416h5mPower Grid TrayBlack PETG8.302h19mIsolinear Chip TrayBlack PETG32.429h18mIsolinear Chips x12x6 TL Blue PETGx6 TL Green PETG10.0310.037h8m7h8mMimetic...

DIY 2020 5 series 3D Printer Build UK
Hacker page by RX HMP
Not sure what shape I am going with I wanted to ration bars for mini mill and a 3d printer or 2 3d printers.Please advise if there is a solid way as this is the typical box type. I didnt like the prusa and I wanted enclosed.Over 60% of items have arrived...

Boosting voltage
Log from Compact, low-power Geiger counter
Towards efficient boost converter architecture Most DIY Geiger counters that I've seen on the Internet have very simple architecture: just an oscillator driving a transistor, sometimes with Zener diodes to limit the output voltage. This approach...

Scaling
Log from Anti-grav assist unit
The 4 1000kv motors are a bit unwieldy when testing. Figuring out the configuration, and the cost at quantities above the 4...So scaled down to micro core-less motors.In total we have 40 core-less motors, and 80 micro props. :)Each motor can draw .8A...

Big Changes, Core Module
Log from Neptune
It's been a while since I had an update on Neptune, but I have been making a ton of progress. I've been focusing on taking everything I learned from prototyping and previous boards and turning that into more effective designs.Most of these changes are...

The One Where He Talks About Money
Log from Sexy Gantry
I am slowly getting into metal working. I found a local supplier of metal, and noticed that they sold aluminum cast tooling plate, the kind that are often used as build plates for 3d printers. By default they come in some pretty large plates,...

Configuring the software
Log from Repurposed wifi controller as GPS-based NTP server
Awesome! We have wired a GPS with its PPS to the motherboard, and now what? First, we need a few missing components: "gpsd" will handle the GPS, while "chrony" will take care of the NTP. # Installing required packages apt install gpsd gpsd-clients...

Hack Chat Transcript, Part 2
Log from Open Source Biology and Biohacking Hack Chat
thethoughtemporiumFeb-13 12:39 PMyou can already use lots of plants for that. it just won't be quite so magically effective JarrettFeb-13 12:39 PMtrue thethoughtemporiumFeb-13 12:40 PMCome spring I'm planning on filling the space I work in with plants...