OK, let's get started. Greetings all, and welcome to the first Hack Chat of 2021! I'm Dan and I'll be the mod today as we welcome back Lex Kravitz, whom we've had on a few times but never before to talk about Plant Communications. Lex, are you out there...
OK, all, we've already got a good discussion going, but let's kick things off "officially". Welcome all, I'm Dan, and Dusan and I will be modding today as we welcome Jonathan Schwartz to the Hack Chat. And I apologize in advance if my fingers get wrapped...
Dan Maloney12:00 PMOK, let's get going. Welcome, one and all, and thanks for coming out today. I'm Dan and I'll be moderating today with Dusan as usual as we welcome Eireann Leverett to the Hack Chat to talk about SCADA Security. I've really been looking...
Dan Maloney12:01 PMOK, looks like we're right at noon, let's get started. Welcome to the Hack Chat, I'm Dan and I'll be moderating today along with Dusan as we welcome Kyle Donnelley to the Hack Chat. Nicolas Tremblay12:01 PMWow, it must be me then Dan...
Top 3 struggles I have with robots and how this project solved them. 1) Cost too much. Mostly because of expensive servos and high end processors. - Designed a cheap driver/sensor board to read the absolute angle of the motor joint and run the...
Dan Maloney11:09 AMHi all, Hack Chat starts in about 50 minutes: Dan Maloney11:09 AMhttps://hackaday.io/event/181633-robot-dogs-hack-chat HACKADAY Robot Dogs Hack Chat Afreez Gan will host the Hack Chat on Wednesday, September 29 at noon Pacific. Time...
Dan Maloney12:01 PMOK, folks, welcome to the last Hack Chat of October! I'm Dan, and along with Dusan I'll be moderating for Ali Shtarbanov today as we talk about soft robotics. Nicolas Tremblay12:01 PMNot a group, but assisting devices plenty Inne12:01...
Dan MaloneyApr-13 12:00 PMHello everyone, welcome to the Hack Chat. I'm Dan, I'll be moderating today along with Dusan as we talk about the 2022 Hackaday Prize with Majenta Strongheart. Dave BlundellApr-13 12:00 PMha_proxy is another good way of doing...
H3lixFossil12:08 PMi think msg uses his daily? might be mistaken back7.co12:08 PM@Hugh Mungis I literally made a cube :) https://back7.co/home/the-open-frame-mini cyzoonic12:08 PM@back7.co I am trying to figure out how to get nice lettering on a lasercut...
Still Thursday or whatever, 21:22, 08/12/2022Thursday, 16:41, 15/12/2022 - it took me an entire week to finish this incomplete project log.Also, I will skip the part were I fix grammar mistakes, this Project Log is just so long that it is lagging...
caladan12:39 PMI think it's C++ on CentOS 7 daniel valuch12:39 PMactually, guess what it was Rosy Schechter12:39 PMHere are the libraries for data analysis: https://root.cern/ daniel valuch12:40 PMwhat was the mean time between failures when LHC started...
Dan MaloneyJun-7 10:52 AMHi all -- Hack Chat coming up in about an hour: Dan MaloneyJun-7 10:53 AMhttps://hackaday.io/event/190942-getting-started-in-ham-hack-chat HACKADAY Getting Started in Ham Hack Chat Mark Hughes and Beau Ambur will host the Hack...
Dan MaloneyJun-7 12:09 PM@Norbert - in the US at least, there's a big chunk of the 6-meter band devoted to RC. Not sure if anyone uses that anymore though Mark J HughesJun-7 12:09 PM@Dan Maloney There are study apps in the google play store and iPhone...
Mark J HughesJun-7 12:57 PMAre you in SoCal? hamsterdaveJun-7 12:57 PMBack in my day, we had to know CW at FIFTEEN words a minute to even look at a radio! fidJun-7 12:57 PM@Mark J Hughes You also don't need a calculator during the test session. K6FID...
Dan Maloney 3:00 PM OK, here we go! I'm Dan, I'll be modding today along with Dusan as we welcome Bryan Murphy and Sam Treadgold to the Hack Chat. I've seen Bryan, is Sam there too? Also maybe someone else? Dusan Petrovic 3:00 PM Welcome to the Modeling...