In the photo gallery, you can see that I used a short USB-C cable to connect the power bank to the Pi. Since the Pi is drawing some current even when it's off, I had to always disconnect the cable after shutting down the Pi to prevent it from draining...
4) Hold it all in place This could be anything from taping it all to the table to fully CNC machining a mounting system. I'll just describe my method. I started off with an MDF base. I used a scrap C channel to hold and adjust the lenses. Mounting for...
If you want to dig deeper, you can modify your Workbench Assistant's CircuitPython code. Code & files may be modified over the USB-C connector or you can put your files on an optional MicroSD card. The internal drive & the optional MicroSD card would...