Close

268 Results for "feather"

  • The Concept
  • Log     from PewPew FeatherWing
  • Here are some more details about the whole concept of this board.The board will be the size of a standard FeatherWing shield -- same as the Adafruit Feather boards, and of course it will plug into those boards. It should work with any of the Feather...

  • Getting Physical
  • Log     from A Halo For Lucy
  • While I'm waiting for the delivery of the VL53L0X sensor boards from AliExpress, I thought I'd take a whack at understanding the PCB requirements for a first prototype of the halo. The Arduino Feather M0 Express that I got from Adafruit has been working...

  • Prep Your Board!
  • Instructions     from Sotto: A Silent One-Handed Modular Keyset
  • Cut your protoboard to roughly fit the size of the Feather. Use your wires to take the inconveniently placed pins and turn them into tidy little rows of four. The rows should be: A0   3v   Gnd   11 A1    3v ...

  • Test Jig Built
  • Log     from OctoSonar FeatherWing
  • I made a new test jig to replicate the function of the old one - a much tidier build this time. It is again configured as an Arduino shield so I can swap it onto the same Arduino without reprogramming. I used one of the scrap OshPark boards for the top...

  • Construction of Probe
  • Instructions     from ArduAOA
  • Cut 2.0 x 1.5 breadboard lengthwise such that one piece had the center screw holes intact.   P1 is pressure side of pressure sensors.  P1 is port closest to Pin 4.  Pin 1 is the notched pin.  Solder pressure sensors to breadboard...

  • First Production Boards
  • Log     from PewPew FeatherWing
  • The PCBs arrived, and I assemble the first four kits already:A single kit is 4 pieces: the PCB with all the SMD parts soldered, the two pin headers, and the LED matrix. You will have to solder them all together yourself.This is for two reasons. FIrst,...

  • Gesture FeatherWing
  • Details     from Gesture FeatherWing
  • The MGC3030 is an integrated capacitive gesture sensor that could be used in a lot of projects, but unfortunately it has pretty strict requirements for how the capacitive surface needs to look like. This is an attempt at providing a ready solution, the...

  • Revision 1 Design
  • Log     from Ultra Low Power Feather Development Board
  • Since the ATSAML21 is such a close relative to the ATSAMD21, this layout is based somewhat on Adafruit's Feather M0 line. However, it also incorporates solar cells for energy harvesting, an accelerometer, and a barometer. Initial specifications are as...

  • Stylish desktop ESP8266 weather station
  • Details     from Stylish desktop ESP8266 weather station
  • The device is based on Adafruit's Feather Huzzah esp8266 and the 2.4" TFT Feather Wing. The enclosure is desigen using Fusion360 and cut out of birchwood using a 140W laser.  This whole project is based on adafruit's guide which you can find here https://learn.adafruit.com/adafruit-feather-huzzah-esp8266/using-arduino-ide,...

  • Result of some Digging
  • Log     from ESP8266 Plant Watering
  • First of all: this the first time I used an Adafruit product and while it costs more comporaed to other sites I am glad I did purchase it there for the followin reasons:It worksIt a very good quality and the design is goodall is open source/visible sourcego...

  • Ordered Boards for Production
  • Log     from OctoSonar FeatherWing
  • Ordering 100 boards from PCBWay, as someone bought out my entire stock of Octosonars. Tweaked the design as follows: upped all the 6 mil tracks to 8 mil - the OSHpark boards failed on the first pass. I'm not sure if this is related, but there was...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday