40 Results for "《 예약문의 OIO↗8489↗8306》강남레깅스㎈선릉레깅스ruler강남레깅스룸강남레깅스선릉레깅스salary 레깅스룸ㅥ ⓙ선릉레깅스룸레깅스룸forgot"

Cell Phone 4G LTE Repeater / Booster / Femtocell
Project by Capt. Flatus O'Flaherty ☠
An outside pole mounted aerial picks up 4G signals which are then filtered, amplified and re-transmitted through a second inside aerial.
- 312
- 223

Open source EMC / EMI tester / alerter
Project by Benjamin Caspar Isaacs
- checking microwave doors for leakage from the magnetron. - checking circuit boards for RF hotspots.
- 6
- 4

Bloodhound: Autonomous Radiolocation Drone
Project by Phil Handley
Speeding up Search & Rescue by locating the position of emergency radio beacons using an autonomous drone.
- 6.7k
- 77

Microwavino
Project by Pero
Bringing makers into microwave world
- 24
- 18

500mW (27dB) ISM Band Transceiver
Project by Jon Thomasson
This is an ISM band transceiver utilizing the Semtech SX1238. Similar to the popular RFM69 except with an added power amplifier on transmit.
- 20
- 21

Breadboarding RF & Microwave Circuits DC - 60 GHz
Project by Erik
Develop RF & Microwave circuits without spinning a PCB using industry grade modular building blocks... For HAM, 5G, & Radar up to 60 GHz
- 40
- 33

X-UHF
Project by Colin Alston
X-UHF is a project to build a low cost RF prototyping system for experimenting in VHF and UHF bands.
- 9
- 7

Flexible GPS Antenna Array for Model Rockets
Project by Eric Sims
This project aims to create a GPS antenna array with integrated amplifiers and RF switch on a flexible PCB for optimal GPS reception.
- 871
- 14

E32-433T LoRa module Tutorial | DIY breakout board
Project by akarshagarwal98
We will use the E32 LoRa module. E32 is a 1 Watt LoRa high power module and we will also take a look at its breakout board.
- 50
- 19

SP6T Wideband RF Switch (5 - 3000 MHz)
Project by Aditya Mukherjee
Single pole 6 throw RF switch ; 3 bit control channel ; 3-5V operation ; Decent isolation ; low insertion loss ; Tinker board add-on.
- 29
- 23

|<
<
1
2
3