70 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗레깅스룸이란や레깅스룸이란hatred레깅스룸비용레깅스룸초이스레깅스룸비용tie 강남레깅스룸← ス강남레깅스룸depend"

DIY SW , MW , Retro look Radio with ESP32/Si5351
Project by mircemk
This radio receiver is capable of receiving all MW and SW bandwidth, and can also operate as an SDR receiver, so with the help of PC and app
- 804
- 69

VUHF Radio
Project by NotBlackMagic
A dual band VHF/UHF module based around two AX5043 radios. Built to work with HAM Radio communications using AFSK and G3RUH modulations.
- 746
- 24

Si4844 Library for Arduino
Project by Ricardo Lima Caratti
This is an Arduino library for the SI4844, BROADCAST ANALOG TUNING DIGITAL DISPLAY AM/FM/SW RADIO RECEIVER, IC from Silicon Labs.
- 3
- 5

M17 Project
Project by Wojciech Kaczmarski
The goal here is to kick the proprietary protocols off the airwaves, so hams are not forced to use them.
- 27
- 19

Syringe based variable reactive elements
Project by Tom Essenpreis
Using a 60mL syringe to make a variable inductor and a variable capacitor for amateur radio use.
- 4
- 5

NPR-H New Packet Radio Modem
Project by kuek
This new modem is build based on the NPR project from f4hdk. It is a compatible hardware with additional features like PoE, LNA and PA.
- 701
- 32

SATRAN - Satellite Tracking Antenna
Project by Daniel Nikolajsen
Wifi-controlled, azimuth/elevation antenna rotator.
- 160
- 92

DIY SDR DSP Radio with Raspberry Pi and RTLSDR
Project by mircemk
SDR DSP radio with with large touch screen and tunning knob
- 519
- 12

LoRa APRS iGate on ESP32 PoE Board
Project by Peter Buchegger
This LoRa APRS iGate is using the T-Internet-PoE Board from TTGO.
- 11
- 14

Simple Digital Mode Transmitter
Project by RobG
A low-power, all-digital transmitter.
- 11
- 10

DIY Si47xx All Band DSP Radio with 2.8 inch touch
Project by mircemk
How to make a relatively simple All band DSP Radio Receiver with a color touch display which is based on the Si47xx series chip.
- 432
- 6

Foxhunt Variable Attenuator
Project by wa4kfz
A belt-worn variable attenuator for amateur radio foxhunt applications. Covers VHF/UHF frequencies with 80dB attenuation.
- 2
- 3

DIY Si4732 LW,MW,SW,SSB Radio with 2.8 inch touch
Project by mircemk
Universal DSP radio, now with new firmware and SI4732 Chip
- 445
- 11

3d printed variable capacitor
Project by Ben
A mostly-printed variable capacitor using copper-clad pcb boards
- 3
- 7

Modularized Narrowband FM Receiver
Project by Dilshan Jayakody
MC3362 and ADF4351 based, modularized, NFM receiver. This receiver is designed to listen to the 2m band amateur radio conversations.
- 4
- 4

1
2
3
4
5
>
>|