As you can see airodump-ng picked up the WiFi of the drone and also that it is running on channel 2. Next I recorded some packages. sudo airodump-ng -w JJRC_out -c 2 -bssid 10:A4:BE:2E:77:B5 wlan0mon While recording I simply used all the functions the...
Before I can proceed with the debouncing circuit, I have to evaluate the characteristics of the transistors and choose the lousiest (debouncing is not a critical circuit). Fortunately I had built a board for manually Testing Germanium transistors. Remark:...
"...O frabjous day! Callooh! Callay!' He chortled in his joy."Today I finished porting the code to the Olimex Duinomite Mini board, so now you can have your emulator for about $25 USD (for what we paid upwards of a couple grand in the day), and soooo...
I'm in the process of making a small program to read the control input from a USB gamepad and send the commands to the quadcopter but first I wanted to make sure I got the UDP protocol right. Therefore, I wrote a small Python script that can be combined...
Finally we got to post on Hackaday! We're back from Makerfaire - it's been a very busy time. Lots of people (20+) tested our device in the field, so to say, and ironically, it could be considered a stress testing for our device, though we couldn't measure...
You can use the phone's spare battery. Circuit diagram upgrade_1.2.1 Press on/off on "Bracelet for the blind" after plugging the spare battery to use. Code upgrade_1.2.1 //bracelet_for_the_blind_Upgrade_1.2.1 //tác giả(Author): Đỗ...
I got approached by PCBway who wanted to sponsor a batch of assembled prototypes, and i just received them and fired them up!! I wanted them without the inductor and tube holders because i want to experiment a bit with different tubes, and to check...
FInally got a HB9CV antenna, a BNC cable and a corresponding adapter to my RTL-SDR. I've put the antenna onto a servo and 3d printed an adapter, the whole setup looks like this:The beacon was quickly wired on a breadboard. The antenna does not have the...
To be honest, i started this project because I did not want to pay about $80 for console and shipping to Czech Republic. If I look back, it cost me much much more, but it would not be such a fun & and some frustration. It took me about 1,5 year to finish...
I did some online research on what parts would be the most cost effective. It seems that it could be significantly easier and cheaper to find a Motorola Lapdock and hack that, rather than get a separate battery, LVDS LCD display, VGA to LDVS driver board,...
Thursday, 16:41, 15/12/202220/12/2022Sorry for the delay, for some reason my brain refused to work these last 5 days, so I didn't work that much on this project log as I wished to. 23/12/2022 For some reason, it seems like this Project log is so...
As the misery spreads, it seems only fitting that we should recognize those who are unfortunate enough to suddenly complete the SMD Challenge. To be included in this club, you must submit photographic evidence (or link thereof) of a working SMD...
So this is where im at: I've built a couple of prototypes, one of which i got working at some point. intend to upload pictures of the pcbs at least considering i've either scrapped or misplaced the assembled versions. At first i tried to have the games...