Close

10619 Results for "%EB%8C%80%EA%B5%AC%EC%98%A4%ED%94%BC%EA%B0%95%EC%B6%94%E2%86%B2www%2Coptime4.com%EB%8C%80%EA%B5%AC%EC%98%A4%ED%94%BC%20%EB%8C%80%EA%B5%AC%EB%A7%88%EC%82%AC%EC%A7%80%20%E2%86%B2%20%EB%8C%80%EA%B5%AC%EC%98%A4%ED%94%BC%E1%99%97%20%EB%8C%80%EA%B5%AC%EC%98%A4%ED%94%BC%EC%83%9D%EA%B0%81%E1%99%97%20%EB%8C%80%EA%B5%AC%ED%9C%B4%EA%B2%8C%ED%85%94%20%EB%8C%80%EA%B5%AC%ED%82%A4%EC%8A%A4%EB%B0%A9%20%ED%83%80%EC%9E%84"

  • Iteration A4
  • Log     from 6-Axis Micro Manipulator
  • So after a few iterations of re-design to work with NEMA-8 sized stepper motors which whilst not the smallest available are the smallest in the sub $20 bracket. In this case $12ea. With the increased size comes the headach of deciding on an arrangment...

  • A proper AC voltmeter ?
  • Log     from Mains protection box
  • I also received a front-panel AC voltmeter. It was a bet because the specs were not very precise but for less than 8$ on eBay, it was worth a try. I like that this model seems to be "old school", based on the venerable ICL7107, so there is headroom for...

  • The ZTO-80 SBC is for Sale
  • Log     from ZTO-80 Computer System
  • Over the past couple of weeks, I've been getting everything ready for the v3.1 boards to be sold online. After receiving the new boards, plus parts to make one board, I soldered one and tested all of the features using the same methods I used to test...

  • MIKBUG Commands
  • Log     from MIKBUG on Multicomp
  • MIKBUG (Smithbug) has the following case-sensitive commands. ; V VIEW MEMORY; E CHANGE MEMORY; M MOVE MEMORY; I FILL MEMORY; F FIND  ; D DISASSEMBLE CODE; & S1 LOAD PROGRAMME; G GO TO PROGRAM; J JUMP TO TARGET PROGRAM ; T TRACE PROGRAM; K CONTINUE...

  • External AC control box.
  • Log     from Grizzly G0704 CNC Conversion
  • Now that Siggraph is over and I finished the lightstage, and my HD oculus rift modification, I can hopefully get some free time to work on things again at a decent rate.My PCB CNC has a useful box that switches the vacuum on and off and since its noisy...

  • Pong in 80 Lines of code.
  • Log     from TinyPong
  • I said 100, got it done with 80 lines of "Game code".Could be cleaner, the whole sketch is about double and the padal placement needs a bit of work.Adding a ball Spin or acceleration when a hit is made with the padal moving. a ball Split extra if...

  • The Keyboard

  • Log     from Anatomy of a Philips VideoWRITER
  • Before I start this log on the keyboard I should mention that I'm in the process of putting all of my writings and software on the Video Writer on a small website. The following is an almost direct copy of what will be the article about the keyboard......

  • AC/DC Converter
  • Log     from PhotonHome - AC Power IoT Homebase
  • I found some nice AC/DC converters from Jameco Electronics, which are fairly high current switching ones. I got a 5V@3A one for $10. This allows me to put this in the case, and have the entire system be powered from the AC power input. No more external...

  • AC Circuit Tested
  • Log     from Air Gesture AC Dimmer/Switch
  • The zero-crossing and AC switching circuit is tested and working. Next test is PWM. Those 6x10K resistors are supposed to be 2x33K. Didn't have any 33K half watt resistors. Therefore circuit will be smaller.Please don't build and test a circuit like...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday