Hello guys, today in this tutorial we will learn, how to make a Universal Tv (IR) Remote. Though this we can control appliances that have IR receiver. Any of IR remote control device can be controlled using this. Suppose you have a Tv, if someone is...
This board can be powered several ways. The most popular way to power Feather boards is by using the USB port. This board is no exception. It works well across both USB and LiPoly batteries. The board is designed from the ground up to be power efficient...
The open communication robot for everyone In recent years, a variety of communication robots have appeared on the market. However, most of them are "closed", dependent on specific proprietary services, or their specifications are not disclosed...
When my station isn't in a radio silence and doing really Recon passively and connect my wire or buy 5G or Wi-Fi it will have access to my personally trained large language model, convolutional neural network, with several additional modules and an agent...
Today we present the FlameWheel Robot assembly tutorial and quick-start guide! It is rather difficult to assemble this robot without guidance. Feel free to refer to my introductory tutorial today.Flamewheel (A 2WD Remote Control Robot) is part of our...
In this project, we will build a 2.4GHz Wlan scanner using the nRF24L01 radio board. In this project, the output delivers all the interference and information in the scanned area in the form of ASCII codes. In the project of making this scanner,...
The JP-QR701 specifications indicate that it has GB2312 support. I think this also applies to similar products that all seem to come from the same OEM or at least from the same design. Most documentation - especially that found on English-language distributors...
1. Introduction Application is 64 steps note looper. Notes are either represented musically or treated as bare data for VCS’s audio registers. Users can choose which row they treat as notes (Note Synth) or audio register data (Glitch Synth). There are...
The story so far... Update: Row scanning working.Known/working: Building and loading via JTAG new firmware into the main FPGA. This firmware is starting from scratch, we don't understand much yet about the default Barco firmware, although we've dumped...
I did a quick test with a laptop(Putty) and Arduino in the vehicle and was able to to get OBD info, so I guess the connections are fine. And the 1996 Ram even started afterwards. I added some new handling for 'SEARCHING...' after this. Looks like there's...
ICStation Team introduce you this PS2 Keyboard read display system in details.The operating voltage of PS2 Keyboard read display system is DC 5V. When you press the keys of letters or numbers, the LCD1602 will display correspondingly and also can control...
For now, updates are only being made to the github repository. https://github.com/edson-acordi/4bit-microcomputer Main Features: Implements a 4 bit CPU2k x 16 Program Memory (up to 4k)2k x 4 RAM (up to 4k)4 Output Ports (16 outputs)4 Input Ports (16...
ED (Electronic Discovery) is specifically designed to engage a family with a friendly faced gadget which is easy to assemble, write code for and encourages them to interact. Ideally this makes electronics a family hobby rather than something Dad does...
It will be an on-going development of my first Data HMD.This working Data HMD can be found here Data Glasses for multimeter And again, the optics will be the challange. This time I will try to make it work with a more common lens.I'm not sure if I will...
The 16C2552 doesn't need a lot of glue on the RC2014 side. A single 74HCT138 is used to decode the I/O space and allow the card to be placed at 80/90/A0/B0/etc with the second port 8 bytes above. The standard configuration used on non Z80 ports is to...