Close

2726 Results for "%EC%9E%A1%ED%86%A0%ED%86%A0%EB%94%94%EB%B9%84 %ED%85%94%EA%B7%B8%EB%9E%A8 DBmong %ED%86%A0%ED%86%A0abc %E1%92%A4 %EC%9E%A1%ED%86%A0%ED%86%A0%EC%82%AC%ED%96%89%EC%82%B0%EC%97%85 %ED%86%A0%ED%86%A0db%EC%B5%9C%EC%A0%80%EA%B0%80 %E1%92%A3 %EC%8B%A0%EC%9A%A9%EB%94%94%EB%B9%84%ED%8C%90%EB%A7%A4"

  • Understanding the computer - Part 2

  • Here are additional details you need to understand including the Control Pulse Matrix and the instructions.The control pulses are the heart of the system. Each instruction has a sequence of control lines that are activated to cause data to flow through...
  • Blockchain Camera

  • Research on how to distinguish between images generated by AI is continuing. I also saw a news story about a company that provides AI image generation services will add digital watermarks to the images it generates. However, there seems to be no single...
  • CCD-pos

  • Gathering components. The TCD1304AP has a good sensitivity in the wavelength range of 400 - 700nm, allowing to apply a 650nm laser. Such diode lasers are widely available and very cheap, I apply a Chinese one of less than €5.-. The prism comes...
  • Arduino-based Dahlander switch

  • Dahlander motor switch replacement© J.N. Simonnet – March 2014Problem statementThis design is intended as a replacement for a 3-position switch doing 0/3000rpm/6000rpm/0 on a Lurem wood machine[1]. This switch is natively equipped with a mechanical...
  • FlowIO Platform

  • All project details, including complete instructional series for how to replicate and make FlowIO are provided at https://www.softrobotics.io/flowio You can also read the research paper https://doi.org/10.1145/3411763.3451513, reproduced below...
  • Etch-A-Whiteboard

  • Etch-A-WhiteboardAutomated Precision Drawing for the Artistically ImpairedNate Foss and Alex HogansonAutomation and Robotics Research LabThomas Jefferson High School for Science and Technology2015-16Table of ContentsAbstract 3Introduction 4Literature...
  • Past Work

  • My process for designing this project began with the hardware. Arguably the most fun part, I started with a breadboard, as pictured below. After some experimenting and iterating, I finally got to the finished circuit, shown in the breadboard and circuit...