Close

7187 Results for "%EC%B2%AD%EC%A3%BC%EC%98%A4%ED%94%BC%EA%B0%95%EC%B6%94%E2%9E%A6www%2Coptime4.com%EC%B2%AD%EC%A3%BC%EC%98%A4%ED%94%BC %EC%B2%AD%EC%A3%BC%EB%A7%88%EC%82%AC%EC%A7%80 %E2%9E%A6 %EC%B2%AD%EC%A3%BC%EC%98%A4%ED%94%BC%E1%99%95 %EC%B2%AD%EC%A3%BC%EC%98%A4%ED%94%BC%EC%95%88%EB%82%B4%E1%99%95 %EC%B2%AD%EC%A3%BC%ED%9C%B4%EA%B2%8C%ED%85%94 %EC%B2%AD%EC%A3%BC%ED%82%A4%EC%8A%A4%EB%B0%A9 %ED%83%80%EC%9E%84"

  • Die, Master Monkey!

  • Avant-garde performance artist with beats. Hacker, inventor, fastest finger drummer on earth. AI/GA/EC/Robotics nut. @garyd
  • 20230214a -- Memory, cont.

  • Operating under the current assumption that RAM is 32 KiB banked at address 0000-7fff, with the first 256 bytes masked off by special function registers and internal SRAM, some other code sections of interest were found.  E.g.:ED00 loc_ED00: ED00...
  • EC firmware dumped

  • After another long hiatus, I've come back to this project. Let's break this thing!I've etched a new board that lets me access important pins (serial TX, RX, CLK, BUSY ; RST and power lines) without having to fiddle with the previous hacky breakout board.I've...
  • Improvement of the EC sensor

  • It is better to read the EC sensor log before reading this one. I wanted to test the stability and accuracy of the EC sensor! So I replaced the EC probe with a fixed resistor (to mimic the resistance of a solution).   The EC probe was replaced...
  • Improvement of the EC sensor

  • It is better to read the EC sensor log before reading this one. I wanted to test the stability and accuracy of the EC sensor! So I replaced the EC probe with a fixed resistor (to mimic the resistance of a solution).   The EC probe was replaced...
  • Hydroponics Nutrient feeder unit

  • I have been growing leafy greens using Hydroponics for the last 3 years. I was tiered checking out for the nutrient levels and pH level of the nutrient water solution, so I decided to make a nutrient feeding unit to maintain the optimal nutrient level...
  • Peak Performance

  • Below is a picture of a patch that gates the input to the ADC so that it is only looking at the value from the EC probe at the end of the square wave pulse, after the initial transient has settled out. It works really well, dutifully recording the voltage...