At last, I found a bit in EC RAM that is used to enable EC ACPI, so ACPI is working now. I copied the ASL code from vendor DSDT, and now battery, AC, and lid status change can be detected by OS now.https://review.coreboot.org/#/c/19072/
Intrigued by the various file-related pointers seen in deleteThisFile_EB9B, I remember that the keyboard scan routine had a final case where the bulk of the keystrokes (the printable ones) are handled, and there was a scan code to ASCII routine before...
나는 해커가되고 싶다. Volo Futurus A Piratica Dalam bahasa Indonesia Saya Mahu Menjadi Menggodam Malaysia OK, so what can I do on Hackaday? There are some rules. We DO NOT involve ourselves in the...
The end goal for the Autodro is a complete monitoring system for under $10. This means that cheaper, simpler, less accurate sensors are needed. I've started with a simple EC sensor, and am hoping to design something around $1.So far, I've created a sensor...
For some reason, EC probes are relatively expensive. In most cases they are more expensive than pH probes, which to me seem a lot harder to make. So, I decided to make my own EC probe, as you can see below:The contacts are gold plated Studex ear piercing...
I just got the pH portion of the circuit working. There actually wasn't anything wrong with the circuit. It turns out that the probe that I was initially was using was bad. I tried a different brand and it worked perfectly. The working probe is listed...
I've got the BIOS loading for Multi-boot Multicomp. It boots up to the Multi-boot prompt. > Available Commands: :ccxxxxiibbbbbb Load Intel-Hex file record Rxxxx Run from address xxxx Sddd System boot Iddd Init: Format directory Pddd[,xxxx] PutSys: write...