Close

27106 Results for "《 예약문의 OIO↗8489↗8306》가라오케┦가라오케world선릉가라오케가라오케사이즈청담가라오케promotion 선릉가라오케┫ ∫선릉가라오케decided"

  • Free Presidential Style Hotline
  • Instructions     from Free Presidential Style Hotline
  • Yate(Yet Another Telephony Engine):Answering Google Voice calls that are forwarded to Google chat is tricky if you don't want to use the Gmail chat application. I found the most functional results were achieved by using Yate, to create an SIP server...

  • Free Presidential Style Hotline
  • Instructions     from Free Presidential Style Hotline
  • Linphonec and Linphonecsh:This is the softphone I used to interact with the python program. It is a little particular to get working so here are some directions. First run linphonec once to create a .linphonerc configuration file in your home folder....

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Take off the faceplate, remove all the batteries (especially the backup coin cell), unscrew the case, and pry it open. You're going to need a torx screwdriver for the case screws. Theres also clips holding the case together. Don't be too worried if you...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Unscrew the circuit board and pull off the RF shield. Be carefull because once you take the board out there will be nothing holding the buttons in.

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • As you can see in the picture, the screen is glued onto the PCB with a thick piece of aluminium between them. Now we have to remove the LCD screen and plate from the motherboard. This is tricky. You must be extremely careful, because the LCD is made...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Now is a good time to cut your EL panel down to size. Lay the LCD on top of it and trace around it with a marker. I chose to have the leads going out the right side (facing the front of the screen). You can cut the EL panel with scissors. You might want...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Now we need to get the metal plate off of the screen. This is the most dangerous part of the project. Get some rubbing acohol and pour it into the holes in the back of the plate. This will help dissolve the adhesive holding it to the screen. I let the...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Take one of those extra pieces of EL panel from earlier and start sliding it between the aluminium plate and the screen. Any other thin piece of plastic will also work. DO NOT USE A KNIFE or any other metal object. Add rubbing alcohol as you go to help...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Now is a good time to test your LCD and make sure it still works. Load the batteries back into the back half of the case. Press the motherboard against the back half of the case so the battery connectors make contact. Use a screwdriver or some other...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • On the back of the LCD there is a reflector and a polarizer. This diagram shows the different layers.The reflector is a thin foil sheet on back of the polarizer. It needs to be removed so the backlight can shine through. The polarizer is a thicker plastic...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Take the new polarizer film and slide it behind the LCD. If you turn the polarizer one way, the screen will be transparrent. If you turn it the other way, the screen will be opaque. Behold the magic of polarized light!Now you have the option of inverting...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Assemble your LCD sandwich with the EL panel on the back, then the polarizer, then the glass. You can use some scotch tape around the edge to hold everything in place. I used some putty to stick the whole thing to the PCB, but you could also use some...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Find a good place to mount the push button that will control the backlight. I chose to put mine on the left side of the calculator, as you can see in the pictures. This was a very tight fit though. Some other suggestions would be on the top or under...

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Carefully bend the EL panel leads so they fold around the back of the PCB. The panel can bend pretty far, just don't crease it.Now install the board back in the front half of the case and screw it down. The EL panel leads will stick up through gap between...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday